Y9025C high-speed series roundness tester Introduction: This instrument is suitable for various annular workpieces, mainly used for measuring the roundness, waviness, coaxiality, perpendicularity, parallelism, flatness and other parameters of various bearing inner and outer ring raceways and steel ball rollers (roundness error can be evaluated by four methods), and can provide the eccentricity and phase of the parts. characteristic: 1. The instrument has a high-precision air flotation spindle and air filtration system, with a high-precision spindle that does not wear out and has a long service life; 2. The instrument adopts the WINDOWS operating platform and professional measurement software, with a simple and intuitive measurement interface and convenient operation; Real time display of graphic data, saving and archiving, printing at any time, graphic analysis reports, intuitive and clear; 3. The workpiece adjustment is convenient and fast, with high detection efficiency; 4. There are no special requirements for the usage environment, and it can be used in workshops and metrology rooms; 5. It has a massive database of measurement result statistics, making it convenient to access measurement results and work online. 6. It has powerful measurement and analysis functions, such as analyzing waviness, verticality, etc; 7. It can perform spectral analysis on the surface state of parts and provide the amplitude of any wave; 8. The instrument comes standard with two types of sensors that can meet the measurement of various diameters and apertures; 9. Measurement operation settings include mouse and keyboard shortcuts, which users can freely choose according to their operating habits; 10. It can be directly used for machine tool adjustment, part process analysis and testing, inter process inspection or final inspection of finished parts. Technical parameters: Spindle accuracy: Radial error ± (0.025+5H/10000) μ m Axial error ± (0.025+6X/10000) μ m System accuracy: 0.06 μ m Data collection point: 1024 points/week Measurement maximum outer diameter: Ø 140 mm (expandable) Minimum inner diameter measurement: 3 mm Maximum height measurement: 200mm (can be raised) Range: ≤ 30 μ m (radius difference) Sensor resolution: 0.01 μ m Sensor force measurement: 2N Filters: 1, 1-500, 2-500, 2-15, 2-50, 2-150, 15-500 Waviness: 3-16, 17-100 Evaluation methods for roundness error: Least Squares Method (LSC), Minimum Zone Method (MZC) Maximum circumcircle (MIC), minimum enclosing circle method (MCC) Magnification: 100, 200, 400, 500, 800, 1000, 2000, 4000, 5000 8000, 10000, 20000, 40000, 50000, 80000, 100000 200000, totaling 17 levels. Spectrum analysis: can provide data values for any frequency band Measurement efficiency: 40-100 pieces/hour Maximum load capacity: 10Kg Speed: 115 revolutions per minute Power supply: three-phase power supply 220V, 50V, 250W Gas source pressure: ≥ 0.45MPa Environmental requirements: Working temperature: normal temperature and humidity: 20-80% RH (no condensation); Good grounding, no obvious seismic source
Introduction: This instrument is suitable for various annular workpieces, mainly used for measuring the roundness, waviness, coaxiality, perpendicularity, parallelism, flatness and other parameters of various bearing inner and outer ring raceways and steel ball rollers (roundness error can be evaluated by four methods), and can provide the eccentricity and phase of the parts.