Introduction: Ventilation aging tester is suitable for wire, leather, plastic, rubber, cloth, before and after heat change characteristics. In order to maintain the fresh air in the box when the wire is heated, the air-conditioning volume is adjusted. The instrument is designed to meet UL1581sect420.9, ASTM-D2436, CNS3556, CNS742, JIS7212, JIS B7757, GB test standards. Technical Parameters: Power supply: AC380V three-phase four-wire system Power: 6KW Temperature range: normal temperature +10°C~300°C Control accuracy: ±0.5°C Resolution: 0.1°C Distribution error: ±1% Heating time: From room temperature to 300°C, about 40 minutes. Machine structure and material: Inner box size: 50cm (length) x 45cm (width) x 50cm (height) Carton size: 120cm (length) x 65cm (width) x 134cm (height) Inner box material: SUS # 304 stainless steel, outer box: paint. Insulation material: 80mm thick high density rock wool. Heater: Solenoid Heater Set: 380V 6KW
Introduction: Ventilation aging tester is suitable for wire, leather, plastic, rubber, cloth, before and after heat change characteristics. In order to maintain the fresh air in the box when the wire is heated, the air-conditioning volume is adjusted. The instrument is designed to meet UL1581sect420.9, ASTM-D2436, CNS3556, CNS742, JIS7212, JIS B7757, GB test standards.