Introduction: VTC-200 vacuum spin coating machine is mainly used in the film formation in laboratories of universities and research institutes. The machine uses high-speed rotation to uniformly coat the surface of the sample with a material with a large viscosity coefficient, such as colloids and solutions. Features: 1, two-stage program control speed. 2, vacuum adsorption fixed sample, easy to operate. 3, using cast aluminum structure, stable operation, low noise. Technical Parameters: Power: 200W Speed: 500rpm-6000rpm Time: 1s-60s Vacuum pump flow rate: >60L/min Size: 500mm×400mm×400mm; Weight: 30kg Installation conditions: This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1, water: equipment with inlet and outlet 2, electricity: AC220V 50Hz, must have a good ground 3, gas: no 4, table: size 600mm × 600mm × 700mm, load-bearing more than 50kg 5, ventilation device: need Standard accessories Vacuum suction cup: 1 Dispenser: 1 Oil-free vacuum pump: 1 Optional accessories: filter (vacuum pump)
Introduction: VTC-200 vacuum spin coating machine is mainly used in the film formation in laboratories of universities and research institutes. The machine uses high-speed rotation to uniformly coat the surface of the sample with a material with a large viscosity coefficient, such as colloids and solutions.
