Brief introduction: The smoke density box furnace designed for blending ISO5659 conical radiation. Used with conical radiation furnace, can make the heat flux of trunk up to 50 kW/m2, and lateral positioning sample, test sample quality loss rate. It also accord with the latest IMO test terms. Measuring samples, in confined Spaces with/without striker flame, vertical exposed to radioactive heat source under the condition of 25 kW/m2, smoke density. Using ISO 5659 conical radiation heating furnace, the user can be heated condition by 10? / ㎡ adjust to 50? / ㎡, or 70 kw / ㎡. In NES 711 tests, incineration and smoldering test conditions, it has to do with ASTME 662 test is different. This test is more and more Features: 1. Blend in structure design and control of the man-machine engineering design; 2.The test can be fully open, the door is convenient for loading and unloading of samples and a clean body 3. The lateral controller is located in the enclosure, convenient operation. When the door is closed, also does not affect the view controller 4.The smoke density and temperature with digital display, check easier, more accurate 5.The inner wall of the casing can be preheated, convenient test and instrument operation 6. Safety shut down plate, easy replacement, safe operation 7. Can provide gas measurement, used to test the gas toxicity 8. Cabinet design for standard 19 inch, convenient to add gas analyzer, the chart recorder and other controllers 9.19 "touch-screen tablet computer control all the way, and can automatically complete the test 10. Move to host by cylinder specimen or up and down automatically open the exhaust port (high resistance to pollution) 11. The test case of coating is easy to clean and chemical resistance 12. Door lock design is convenient for one-time the door is closed 13. Precise transmittance shows smoke and smoke density 14. Using a mass flow controller and differential pressure sensors can improve the accuracy of the manometer and realize automatic leak test
Brief introduction: The smoke density box furnace designed for blending ISO5659 conical radiation. Used with conical radiation furnace, can make the heat flux of trunk up to 50 kW/m2, and lateral positioning sample, test sample quality loss rate. It also accord with the latest IMO test terms. Measuring samples, in confined Spaces with/without striker flame, vertical exposed to radioactive heat source under the condition of 25 kW/m2, smoke density.Using ISO 5659 conical radiation heating furnace, the user can be heated condition by 10? / ㎡ adjust to 50? / ㎡, or 70 kw / ㎡. In NES 711 tests, incineration and smoldering test conditions, it has to do with ASTME 662 test is different. This test is more and more
