Brief introduction:
The fire, people smoke choking or due to the invisible way to escape, so in the prevention of fire, accurate test materials is very important for the smoke density; The smoke density test instrument building materials meet the national standard GB/T8627-2007 stipulated in specifications and requirements, can be used to measure and describe the controlled laboratory conditions of materials, products, components, response to heat and flame, measurement of building materials in combustion or decomposed under the experimental conditions of static produce smoke; Standard: ASTM D2843 smoke density test GB/T 8627 smoke density test Features:
1. The processing of the lacquer that bake, beautiful, anticorrosion and durable;
2. Transparent toughened glass door for observation test;
3. Stainless steel sample clamp and sample template;
4. Light absorption rate: 0-100% continuous measurable. Smoke density resolution is 0.1%
5. The smoke density measurement accuracy: + / - 3%;
6. Equipped with main burner and vice burner.
7. Equipped with fan, test the rear smoke design; The exhaust air 1700 l/min
8.300 mm light path. Distance from the base above 480 mm high;
9. Optical glass is easy to wipe, keep the pervious to light glass clean, avoid the attached dust particles influence pervious to light effect
Brief introduction: The fire, people smoke choking or due to the invisible way to escape, so in the prevention of fire, accurate test materials is very important for the smoke density; The smoke density test instrument building materials meet the national standard GB/T8627-2007 stipulated in specifications and requirements, can be used to measure and describe the controlled laboratory conditions of materials, products, components, response to heat and flame, measurement of building materials in combustion or decomposed under the experimental conditions of static produce smoke;
