TRDL-6180 X Fluorescence Sulfur Analyzer Introduction: TRDL-6180 X fluorescence sulfur analyzer is a new quantitative analysis instrument based on microcomputers. This instrument is an analytical instrument based on the principle of X-ray fluorescence energy dispersion, using X-ray tube excitation technology and a combination of nuclear electronics and microcomputers as a physical measurement method; The detection does not require any chemical reagents, which is more accurate and faster than chemical analysis methods. It can detect the sulfur content in liquid and solid powder samples in 60 seconds. Main purpose 1. Measure the total sulfur mass percentage content in liquid samples such as crude oil, heavy oil, diesel, kerosene, gasoline, etc; 2. Measure the sulfur content in solid powder samples, such as anode carbon blocks, petroleum coke, modified asphalt and other carbon materials; 3. Measure the total sulfur or sulfide content in lubricating oil and petroleum additives; 4. Measure the total sulfur or sulfide content in other liquids and solids. Instrument features： 1. The micro computerized design of the instrument's electromechanical integration is compact and can be used as a desktop or portable for outdoor use, making it convenient; 2. Dual use of 220V AC or 12V DC. The overall power consumption is only 30W, which is energy-saving; 3. Using spectral analysis method, no chemical reagents are required, and there is no waste discharge; 4. Wide variety of detection, wide detection range, high detection accuracy, fast analysis speed, low consumption of standard samples, and reusable samples; 5. Use a sample cup, pour the sample directly into the cup for testing; Some solid samples can be tested by pressing them into tablets; 6. The instrument has a large data storage capacity, and the content analysis results and calibration curve parameters can be checked at any time; 7. Adopting a thermal printer makes it simple and convenient to replace printing paper, and also eliminates the need for printing ribbon consumables; 8. Accurate positioning of the sample stage, large screen LCD display, human-machine interaction, simple and beautiful; 9. Execution standard: GB/T17040; Also meets the standard ASTM D4294-03 Technical parameters: Sulfur measurement range: above 7ppm; Sample size: 2-3ml; Measurement time: n * 30 seconds (n is a natural number from 1 to 5, usually taken as n=2); Provide the mean and standard deviation at the end of the measurement; Precision: repeatability (r):<0.02894 (X+0.1691); Reproducibility (R):<0.1215 (X+0.05555); Single sample automatic measurement times: 2, 3, 5, 10, 50 can be set arbitrarily, and the average value and standard deviation will be given at the end of the measurement; Number of calibration curves: The instrument can store 10 calibration curves, 5 of which are linear and 4 are binomial parabolas; Power supply: AC220V, 50Hz or DC 12V Rated power: 30W; Size: 378 * 232 * 158mm Weight:<7 kilograms
Introduction: TRDL-6180 X fluorescence sulfur analyzer is a new quantitative analysis instrument based on microcomputers. This instrument is an analytical instrument based on the principle of X-ray fluorescence energy dispersion, using X-ray tube excitation technology and a combination of nuclear electronics and microcomputers as a physical measurement method; The detection does not require any chemical reagents, which is more accurate and faster than chemical analysis methods. It can detect the sulfur content in liquid and solid powder samples in 60 seconds. Main purpose 1. Measure the total sulfur mass percentage content in liquid samples such as crude oil, heavy oil, diesel, kerosene, gasoline, etc; 2. Measure the sulfur content in solid powder samples, such as anode carbon blocks, petroleum coke, modified asphalt and other carbon materials; 3. Measure the total sulfur or sulfide content in lubricating oil and petroleum additives; 4. Measure the total sulfur or sulfide content in other liquids and solids.
