CS-3000G carbon sulfur analyzer Instrument Description
CS-3000G is equipped with a high-frequency induction furnace and electric resistance furnace , the sample can be determined simultaneously carbon and sulfur. It provides a quick and accurate analysis results can be used for various applications. CS-3000G is equipped with up to four separate infrared detector cell , can be a measurement of carbon , sulfur content and low concentrations of high content . The length of each cell may be to optimize the infrared range and customization. The analyzer can quickly and accurately analyze the steel , cast iron, alloys, cement, sand , glass, lime , rubber , catalysts , soil, semiconductors , electronic materials, metal ores, ceramics , coal, graphite and other organic materials in carbon, sulfur content , and easy to operate, easy maintenance and repair . Instrument features
Infrared detection unit : expandable to up to four separate infrared absorption cell , can be customized according to user needs
Detector: adopting international advanced solid-state pyroelectric infrared CO2, SO2 detector
Motor: Swiss import synchronous motor, continuous trouble-free
Source: The United States imports antioxidant , stable infrared light source
Constant temperature : temperature control throughout the gas chamber , ensuring a constant temperature analysis to ensure measurement accuracy ;
Protective gas : infrared light source and detector using oxygen protection , purification and isolation of the surrounding atmosphere , and improve the stability and accuracy ;
Analysis of gas flow using precision electronic flow control technology
Imported special metal dust filter , easy to disassemble , easy to clean
Feasts standby instrument design, analysis, ending the system automatically enters the throttle state
The instrument can automatically read the sample weight , the weight of flux , and auto-complete tare function ;
High carbon and high sulfur channel automatically switches Instrument parameters
1 analysis range
Carbon : 1ppm ~ 0.2% high carbon : 0.2% to 6%
low Sulfur : 1ppm ~ 0.3% high Sulfur : 0.3% ~ 30% *
Note: The sample weight change analysis can be extended to 100% range . * Can be customized according to customer demand sulfur absorption cell .
2 analysis accuracy
Low Carbon : 1ppm or RSD≤1% high carbon : RSD≤0.5%
low Sulfur : 1.5ppm or RSD≤1.5% high Sulfur: RSD≤1.5%
3 Sensitivity : 0.01ppm
4 Analysis Time
High frequency induction furnace : 40 seconds to 60 seconds
Tubular resistance furnace : 150 seconds to 300 seconds
5 sample is weighed
High frequency induction furnace : 0.1g ~ 1.0g;
Tubular resistance furnace : 400mg / coal ( typical value )
6 burner
High frequency induction furnace : 18MHz 2.7KVA each analysis frequency furnace combustion chamber cleaning process can be automated , easy routine maintenance.
Tubular resistance furnace : Max.20A, Max.1550 ℃, the temperature can be adjusted continuously .
7 crucible pretreatment
High-frequency induction furnace with a ceramic crucible : a diameter of 25mm, 27mm high
Tubular resistance furnace with porcelain boat : standard length 87mm, width 12mm, 10mm high
8 Power
Analyzer power 220VAC ± 10% 50 / 60Hz 16A
Resistance furnace power 220VAC ± 10% 50 / 60Hz 20A
9 Instrument Size
Tubular resistance furnace width 33cm high 52cm thick 60 cm
High frequency induction furnace 76cm wide 55cm high 77cm thick
10.Weight
High frequency induction furnace 100kg;
Tubular resistance furnace 30kg
Instrument Description
CS-3000G is equipped with a high-frequency induction furnace and electric resistance furnace , the sample can be determined simultaneously carbon and sulfur. It provides a quick and accurate analysis results can be used for various applications. CS-3000G is equipped with up to four separate infrared detector cell , can be a measurement of carbon , sulfur content and low concentrations of high content . The length of each cell may be to optimize the infrared range and customization. The analyzer can quickly and accurately analyze the steel , cast iron, alloys, cement, sand , glass, lime , rubber , catalysts , soil, semiconductors , electronic materials, metal ores, ceramics , coal, graphite and other organic materials in carbon, sulfur content , and easy to operate, easy maintenance and repair .