CS-3000 carbon sulfur analyzer Instrument Introduction
CS-3000 is equipped with a high-frequency induction furnace in the sample can be determined simultaneously inorganic carbon and sulfur. It provides a quick and accurate analysis results can be used for various applications. CS-3000 is equipped with up to four separate infrared detector cell , can be a measurement of carbon , sulfur content and low concentrations of high content . The length of each cell may be to optimize the infrared range and customization. The analyzer can quickly and accurately analyze the steel , cast iron, alloys, cement, sand , glass, lime , rubber , catalysts , soil, semiconductors , electronic materials, metal ores, ceramics and other materials of carbon , sulfur content, and easy to operate, maintenance and repair easy . features
Reliable sample extraction unit frequency induction furnace
Expandable to up to four separate infrared absorption cell , can be customized according to user needs
Adopt international advanced solid-state pyroelectric infrared CO2, SO2 detector
Swiss import synchronous motor, continuous trouble-free
Imported anti- American oxidation stability infrared light source
Entire gas chamber thermostatically controlled to ensure constant temperature analysis to ensure measurement accuracy ;
Infrared light source and detector using oxygen protection, purification, isolation of the surrounding atmosphere , and improve the stability and accuracy ;
Analysis of gas flow using precision electronic flow control technology
Imported special metal dust filter , easy to disassemble , easy to clean
Feasts standby instrument design, analysis, ending the system automatically enters the throttle state
The instrument can automatically read the sample weight , the weight of flux , and auto-complete tare function ;
High carbon and high sulfur -channel automatic switching ; Instrument parameters
1. analysis range
Carbon : 1ppm ~ 0.2% high carbon : 0.2% to 6%
low Sulfur : 1ppm ~ 0.3% high Sulfur : 0.3% ~ 30% *
Note: The sample weight change analysis can be extended to 100% range . * Can be customized according to customer demand sulfur absorption cell .
2. analysis accuracy
Low Carbon : 1ppm or RSD≤1% high carbon : RSD≤0.5%
low Sulfur : 1.5ppm or RSD≤1.5% high Sulfur: RSD≤1.5%
3. Sensitivity : 0.01ppm
4. Analysis time: 30 seconds to 40 seconds
5. samples weighing : recommended range 0.2g ~ 0.5g, can change the sample weight based on content of the sample .
6. high-frequency induction furnace : 18MHz 2.7KVA
7. Power : 220VAC ± 10% 50 / 60Hz Maximum current 16A
8 Instrument Dimensions: 76cm wide 55cm high 77cm thick
9 Instrument Weight : 100kg
10. carrier gas: oxygen, 99.9% purity
The CS-3000 is equipped with a high frequency induction furnace for simultaneous determination of carbon and sulfur in inorganic samples. It provides fast and accurate analysis results for a wide range of applications. The CS-3000 is equipped with up to four independent infrared detection cells to measure high and low carbon and sulfur concentrations at one time. The length of each infrared cell can be customized for an optimized range.
