Introduction: SPC-32 electric plane screen printer is a special equipment for fuel cell and solar cell coating. The use of linear guides, with the frequency adjustment adjustment rotation, to ensure the stability and precision of printing; scraper pressure and printing speed adjustable to ensure the quality of printing. Features: 1. There is a fine-adjustment device for alignment between the PCB board and the screen. 2. Both single and double sides can be adjusted to left and right respectively, suitable for screen printing of different sizes. 3, automatic printing process, quality is more stable and more efficient. 4. Suspending scraper system makes printing more uniform. Technical Parameters: Power Supply: Single Phase AC208V-240V 50Hz/60Hz Power: 2500W Platen: 330mm×400mm The largest printing area: 200mm × 300mm Printing height: 30mm Printing speed: 300pcs/h-500pcs/h Repeat printing accuracy: ±0.03mm Installation conditions This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1. Water: The equipment is equipped with a self-circulating cooling water machine (filled with purified water or deionized water) 2, electricity: AC380V 50Hz (63A air switch), must have a good grounding 3、Gas: Argon gas (99.99% or more purity) must be filled in the chamber of the equipment, and you need to bring your own argon gas cylinder (it comes with a Ø6mm double ferrule fitting) 4、Workbench: Size 1500mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: need
Introduction: SPC-32 electric plane screen printer is a special equipment for fuel cell and solar cell coating. The use of linear guides, with the frequency adjustment adjustment rotation, to ensure the stability and precision of printing; scraper pressure and printing speed adjustable to ensure the quality of printing.
