Profile: Solar module IV tester is a high reliability three workers Wuhan Photoelectric Equipment Manufacturing Co Ltd development and production of solar battery components, special test equipment with high precision. The equipment with high power, imported long-life xenon lamp as light source simulator, imported high precision four channel synchronous data acquisition card test data collection, professional super linear electronic loads to ensure accurate test results. For the detection of solar modules for solar PV module manufacturers. Characteristic： 1, the constant light intensity, to ensure the constant intensity in the test range, to ensure that the test data is reliable. The flash pulse width of 0 ~ 100 ms continuously adjustable, step 1ms, adapt to different cell measurements. 2, the digital control to ensure the accuracy of the test; hardware parameters programmable control, simplify equipment debugging and maintenance 3, the use of 2M * 4 high speed synchronous acquisition card, more to restore the details of the test curve, accurately reflect the actual work of the measured battery chip 4, the use of infrared temperature measurement, truly reflect the temperature change of the battery, and automatically complete the temperature compensation 5, automatic control, real-time detection of the battery segment and the main unit circuit in the whole test interval, and provide software / hardware protection to ensure the reliable operation of the equipment technical parameters: Project:SMT-B Light source:1500W high power pulsed xenon lamp, xenon lamp life 100 thousand times (import) Intensity range:100mW/cm2 (range 70 ~ 120mW/cm2) Spectrum:With the IEC60904-9 spectral irradiance distribution requirements AM1.5 Irradiance uniformity:+ 3% Irradiance stability:+ 3% Test repeatability:+ 1% Flash duration:0 ~ 100ms continuously adjustable, step 1ms Data acquisition:I-V, P-V curve over 8000 data acquisition points Testing system:Windows XP Test area:2000mm * 1200mm Test speed:6 seconds / piece Measuring temperature range:0 to 50 DEG C (resolution of 0.1 degrees Celsius), infrared temperature measurement, direct measurement of battery temperature Effective test range:20W ~ 300W Measuring voltage range:0V ~ 150V (resolution 1mV) range 1/16384 Measuring current range:200mA ~ 20A (resolution 1mA) range 1/16384 Test parameters:Isc, Voc, Pmax, Vm, Im, FF, EFF, Temp, Rs, Rsh Test condition correction:Automatic correction Working hours：Equipment can work continuously for more than 12 hours Power Supply：Single phase 220V/50Hz/2kW
Profile: Solar module IV tester is a high reliability three workers Wuhan Photoelectric Equipment Manufacturing Co Ltd development and production of solar battery components, special test equipment with high precision. The equipment with high power, imported long-life xenon lamp as light source simulator, imported high precision four channel synchronous data acquisition card test data collection, professional super linear electronic loads to ensure accurate test results. For the detection of solar modules for solar PV module manufacturers.
