SINO Industrial High Speed Fiber Spectrometer Introduction: SINO fiber optic spectrometers are specially designed and developed for industrial customers. Its compact size is only 92 x 66 x 34mm³. The structure is stable and can achieve ~0.15pixel/°C temperature drift suppression. With a focal length of 50mm, the sensitivity is 3 times higher than that of the FX2000 under the same conditions. For the first time, an optional detector is used, which is compatible with a variety of CMOS and CCD detectors. With replaceable slit configurations, there are multiple configurations to choose from within 10um-200um. SINO is a popular industrial high-speed detection spectrometer with customers. Typical application areas: In Vitro Diagnostics In vitro diagnostics often require higher resolution and higher signal-to-noise ratio, and this spectrometer meets the needs of such customers. Flue gas analysis Flue gas analysis requires high signal-to-noise ratio, UV sensitivity and optical resolution, and SINO considers the needs of UV CEMS detection. NIR sorting NIR sorting needs to be suitable for 680-1100nm infrared spectrum sorting, and has a high cost performance. Features: 1.50mm focal length design After adopting this short focal length design, SINO obtains higher luminous flux, and the sensitivity is increased to 3 times than FX2000 under the same conditions; 2. CMOS detector can be used SINO can choose CMOS detector, the fastest sampling rate is increased to 2000f/s, in addition, the detector is naturally sensitive to ultraviolet spectral signals and has high quantum efficiency in the ultraviolet band; 3. Structural design of anti-temperature drift SINO has a reasonable structure design, and has done relatively complete mechanical simulation and testing, and the temperature drift can be suppressed at ~0.15pixel / °C. Technical parameter: Detection range: 200~1000nm, depending on the grating Optical Resolution: Optimal 0.3nm (FWHM) depending on grating and slit Number of pixels: 2048 pixels, 3648 pixels, 4096 pixels, optional Optical table: 42mm focal length, f-number 4, asymmetrical crossed C-T beam path Corrected Linearity: > 99% Temperature Drift: ~0.15 pixel/°C Incident slit: 10μm, 25μm, 50μm, 100μm, 200μm Optical interface: SMA905, FC/PC Data transmission: USB3.0 type-C, RS-232 External trigger: 9 modes including 8 trigger modes Dimensions: 91.9 x 65.5 x 33.7 mm³ Weight: 0.28kg
Introduction: SINO fiber optic spectrometers are specially designed and developed for industrial customers. Its compact size is only 92 x 66 x 34mm³. The structure is stable and can achieve ~0.15pixel/°C temperature drift suppression. With a focal length of 50mm, the sensitivity is 3 times higher than that of the FX2000 under the same conditions. For the first time, an optional detector is used, which is compatible with a variety of CMOS and CCD detectors. With replaceable slit configurations, there are multiple configurations to choose from within 10um-200um. SINO is a popular industrial high-speed detection spectrometer with customers. Typical application areas: In Vitro Diagnostics In vitro diagnostics often require higher resolution and higher signal-to-noise ratio, and this spectrometer meets the needs of such customers. Flue gas analysis Flue gas analysis requires high signal-to-noise ratio, UV sensitivity and optical resolution, and SINO considers the needs of UV CEMS detection. NIR sorting NIR sorting needs to be suitable for 680-1100nm infrared spectrum sorting, and has a high cost performance.
