SDS-V sulfur analyzer Introduction: The SDS-V sulfur analyzer adopts an optimized system design to ensure complete combustion of coal samples, complete electrolysis of SO2, and complete integration of current (charge) in all aspects, and accurate testing. Applicable scope: Applicable to the determination of total sulfur content in combustible materials such as coal, coke, petroleum, and solid biomass fuels. Compliant with standards: GB/T214-2007 "Method for Determination of Total Sulfur in Coal" JJG1006-2005 "Verification regulation of total sulfur analyzer in coal" ASTM D 4239-2008 "Determination of sulfur in coal and coke - High temperature tube furnace combustion method" Features: 1. Optimize system design to ensure complete combustion of coal samples, complete electrolysis of SO2, and complete integration of current (charge) in all aspects, and accurate testing. 2. By using hardware integration, the data is measured and objective, ensuring the accuracy of high, medium, and low sulfur test results without secondary correction, and avoiding singularity bias in experimental data. 3. Adopting an electrolytic cell positioning mechanism and a wide and thick electrode design, stirring evenly to improve testing accuracy. 4. It adopts a maintenance free air pump with stable performance, with a long service life and no need to replace the rubber bowl. Technical parameters: Sulfur measurement range: 0.01%~40% Temperature control accuracy: ± 2.5 ℃ Sulfur resolution: 0.001% Working furnace temperature: 1150 ℃ (coal) 900 ℃ (oil) 1190 ℃ (cement) Sample mass: 10mg~110mg Test time: 3-6 minutes/sample Sample quantity: 1 Maximum power: 3.5kW Power supply voltage: 220V ± 10%, 50/60Hz
Introduction: The SDS-V sulfur analyzer adopts an optimized system design to ensure complete combustion of coal samples, complete electrolysis of SO2, and complete integration of current (charge) in all aspects, and accurate testing. Applicable scope: Applicable to the determination of total sulfur content in combustible materials such as coal, coke, petroleum, and solid biomass fuels. Compliant with standards: GB/T214-2007 "Method for Determination of Total Sulfur in Coal" JJG1006-2005 "Verification regulation of total sulfur analyzer in coal" ASTM D 4239-2008 "Determination of sulfur in coal and coke - High temperature tube furnace combustion method"
