RS2600 Gas Online Raman Analyzer Introduction: The RS2600 gas online Raman analyzer is based on the principle of laser Raman spectroscopy, which can detect all gases except inert gases and achieve simultaneous online analysis of multi-component gases. Can be used for: 1. The petrochemical industry can detect hydrocarbon gases such as CH4, C2H6, C3H8, C2H4, etc 2. The fluorine chemical industry can detect corrosive gases such as F2, BF3, PF5, HCl, HF, etc 3. The metallurgical field can detect gases such as N2, H2, O2, CO2, CO, etc 4. Can detect isotopic gases such as H2, D2, T2, HD, HT, DT, etc characteristic: 1. Multi component: Simultaneous online analysis of multi-component gases 2. General: including homonuclear diatomic gases (N2, H2, F2, Cl2, etc.), isotopic gases (H2, D2, T2, etc.), can detect almost all gases except rare gases 3. Second level response: Complete a single detection within seconds 4. No maintenance required: can withstand high pressure, can directly detect without consumables (chromatographic column, carrier gas) 5. Wide quantitative range: detection limit as low as ppm level, range up to 100% upper limit Technical parameters: Product model: RS2600 Air interface: Standard card sleeve connector, 3mm, 6mm, 1/8 ", 1/4" optional Communication interface: USB 2.0, RS232 DB9, RJ45 Preheating time:<10 minutes Power supply: 100~240 VAC, 50~60 Hz Sample gas temperature: -50 ℃~40 ℃ Sample gas pressure: ＜ 1.0 MPa Environmental temperature: 5 ℃~40 ℃ Environmental humidity: 0~90% RH Host screen: 10 inch touch screen display Host size: 445 mm (width) x 350 mm (height) x 600 mm (depth) Host weight: 40 kg
Introduction: The RS2600 gas online Raman analyzer is based on the principle of laser Raman spectroscopy, which can detect all gases except inert gases and achieve simultaneous online analysis of multi-component gases. Can be used for: 1. The petrochemical industry can detect hydrocarbon gases such as CH4, C2H6, C3H8, C2H4, etc 2. The fluorine chemical industry can detect corrosive gases such as F2, BF3, PF5, HCl, HF, etc 3. The metallurgical field can detect gases such as N2, H2, O2, CO2, CO, etc 4. Can detect isotopic gases such as H2, D2, T2, HD, HT, DT, etc
