RS2000 liquid online Raman analyzer Introduction: Chemical/pharmaceutical/material process development and production require quantitative analysis of components. Usually, laboratory offline analysis techniques are used. After the sample is taken to the laboratory, instruments such as chromatography, mass spectrometry, and nuclear magnetic resonance spectroscopy are used to provide information on the content of each component. The detection time is long and the sampling frequency is low, which cannot meet many real-time monitoring requirements. Our company's RS2000 liquid online Raman analyzer provides online monitoring solutions for chemical, pharmaceutical, material process research and production, which can perform in-situ, real-time, continuous, and rapid online monitoring of the content of each component in the reaction. characteristic: 1. Can withstand reaction conditions such as strong acid, strong alkali, strong corrosiveness, high temperature and high pressure 2. Real time response in seconds, no need to wait, providing timely analysis results 3. No sampling or sample processing is required, and in-situ monitoring does not interfere with the reaction system 4. Continuous monitoring to quickly determine the endpoint of the reaction and prompt abnormal reactions Technical parameters: Number of detection channels: single channel Host size: 375 mm (length) x 360 mm (width) x 185 mm (height) Host weight: not exceeding 10 kg Probe: Comes with one 1.3m non immersed fiber optic probe (PR100) and one 5m immersed probe (PR200-HSGL) as standard, and can be optionally equipped with other types of probes or flow cells Software function: 1. Online monitoring: It can continuously and real-time collect single channel signals, provide real-time information on substance content and change trends, and achieve intelligent analysis of unknown components during the reaction process 2. Data analysis: data can be smoothed, peak searched, denoised, baseline removed, difference spectrum processed, etc 3. Model establishment: A quantitative model can be established using samples with known concentrations; Quantitative models can also be automatically established based on real-time collected reaction process data Wavelength accuracy: 0.2 nm Wavelength stability: better than 0.01 nm Communication interface: USB 2.0 Data output format: SPC standard spectrum, PRN, TXT and other formats are optional Power supply: 100~240 VAC, 50~60 Hz Working temperature: 0~40 ℃ Storage temperature: -20~55 ℃ Relative humidity: 0~90% RH Equipment power: 50 W Preheating time:<5 minutes Communication protocol: Modbus
Introduction: Chemical/pharmaceutical/material process development and production require quantitative analysis of components. Usually, laboratory offline analysis techniques are used. After the sample is taken to the laboratory, instruments such as chromatography, mass spectrometry, and nuclear magnetic resonance spectroscopy are used to provide information on the content of each component. The detection time is long and the sampling frequency is low, which cannot meet many real-time monitoring requirements. Our company's RS2000 liquid online Raman analyzer provides online monitoring solutions for chemical, pharmaceutical, material process research and production, which can perform in-situ, real-time, continuous, and rapid online monitoring of the content of each component in the reaction.
