Brief introduction: Aging room, also called burning room, simulation is for high-performance electronic products give a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the guarantee of the production enterprises to improve product quality. Features: 1. Using cycle and long axis of the fan motor and resistance to high temperature cycle fan vane structure, so as to achieve forced convection diffusion vertical circulation. 2. Air duct in the top, on both sides of the wind, return air in the middle. 3, with lighting facility. 4. Test the door and the body adopt double high tensile silica gel of high and low temperature resistance, to ensure that the interior of closed. 5. A single ㎝ size 90 x 90 ㎝ (W * H), two-door open. 6. Use double deck glass observation window 7. Have a test hole (phi 50 mm) can be used external test power supply cord or signal lines. 8. Laboratory floor, bearing 100 kg/M2 Technical indicators: Model: RHD - 45 Internal size: 400 * 450 * 450 mm (D * W * H) Range of working temperature: room temperature to 80 ℃. Heating rate: 1 ℃ / min Control accuracy, plus or minus 1.0 ℃ Temperature uniformity: + / - 5 ℃ or less (in the case of load constant temperature measured by three hours) Plus or minus 7 ℃ or less (in the case of load constant temperature measured by an hour) Temperature fluctuation degree, plus or minus 2 ℃ or less
Brief introduction: Aging room, also called burning room, simulation is for high-performance electronic products give a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the guarantee of the production enterprises to improve product quality.
