QGZ-DG1 fully automatic guide rail cutting machine Introduction: This machine is designed specifically for cutting guide rail type workpieces, using ABB high-power motors, Schneider Electric, and Mitsubishi software to achieve efficient and fast cutting of workpieces, with very high reliability and control capabilities. After the workpiece is cut, the spindle automatically returns to its original position, and with the cooperation of the roller conveyor, uninterrupted cutting operations can be achieved. The surface of the cut sample is bright, smooth, and burn free, making it an ideal equipment for cutting guide rail type workpieces, and suitable for production processing and sample inspection. characteristic: 1. ABB-11KW high-power motor achieves efficient cutting of various materials; 2. The spindle has automatic intelligent feed, and through photoelectric induction, it automatically returns to its original position after cutting; 3. The spindle can be precisely controlled by an electronic handwheel or automatic control, with a cutting perpendicularity within 0.3; 4. Hydraulic automatic fixture, one click automatic clamping (optional with 15 °, 30 °, 45 ° fixtures); 5. Open at both ends to meet the cutting needs of ultra long bar materials, coupled with roller conveyors to achieve uninterrupted cutting operations; 6. Warning prompt for grinding wheel wear, ensuring no abnormalities in cutting; 7. Perforated brass clamping base plate; 8. Dual LED lighting, automatic fog removal system, bright and clear cutting room; 9. Six cooling water pipes to prevent sample burns; 10. Mobile magnetic filtration circulating water tank, avoiding blockage and high utilization rate. Technical parameters: Model: QGZ-DG1 Control mode: automatic cutting, 10 inch industrial touch screen control, also switchable to joystick control Feed rate: 1-200mm/min (recommended 5-12mm/min) Cutting blade size: Φ 400 × 3 × Φ 32mm Cutting platform size (X * Y): 632 × 565mm Y-axis travel: 200mm Z-axis travel: 260mm Maximum cutting section: 140 × 80mm Fixture opening: 160mm, hydraulic automatic clamping Spindle motor: ABB motor, 11kW Speed: 500-3000 r/min Feed motor: servo motor Input power supply: 380V, 50Hz, 20A three-phase five wire Dimensions: 1860 × 1755 × 2190mm Weight: Approximately 2500kg Water tank capacity: 120L Pump flow rate: 100L/min Water tank size: 700 × 630 × 800mm Water tank weight: 90kg
Introduction: This machine is designed specifically for cutting guide rail type workpieces, using ABB high-power motors, Schneider Electric, and Mitsubishi software to achieve efficient and fast cutting of workpieces, with very high reliability and control capabilities. After the workpiece is cut, the spindle automatically returns to its original position, and with the cooperation of the roller conveyor, uninterrupted cutting operations can be achieved. The surface of the cut sample is bright, smooth, and burn free, making it an ideal equipment for cutting guide rail type workpieces, and suitable for production processing and sample inspection.
