Introduction: Q-100B cutting machine is composed of body, electric control box, cutting room, motor, cooling system, cutting wheel and other components. The cutting machine can not only cut circular workpieces with a diameter of up to 100 mm, but also can cut rectangular specimens up to 100 mm in height and 200 mm in depth. The machine cools the sample through the cooling system to prevent the sample from overheating and burning the tissue during the cutting process. The machine can also set the cutting speed by cutting different samples, thus improving the quality of the cut sample. The machine is divided into manual cutting and automatic cutting. The large-volume cutting room is more convenient for the cutters, and it is one of the sample preparation equipments required for metallurgical experiments in colleges and universities and factories. Technical Parameters: a) Power supply: Three-phase four-wire (380v, 50Hz b) Main shaft speed: 2100 rpm c) Grinding wheel specification: 350mm*2.5mm*32mm d) Maximum cutting capacity: 100mm Note: The cutting ability mentioned here refers to the design cutting ability of the new cutting wheel. The actual cutting ability depends on the sample material, the grinding wheel and the clamping technology. e) Maximum cutting volume: 100mm*200mm f) Motor: YS90L2-2 3KW g) Cutting table size: 310*280mm h) Shape Dimensions: 930*990*1230mm
Introduction: Q-100B cutting machine is composed of body, electric control box, cutting room, motor, cooling system, cutting wheel and other components. The cutting machine can not only cut circular workpieces with a diameter of up to 100 mm, but also can cut rectangular specimens up to 100 mm in height and 200 mm in depth. The machine cools the sample through the cooling system to prevent the sample from overheating and burning the tissue during the cutting process. The machine can also set the cutting speed by cutting different samples, thus improving the quality of the cut sample. The machine is divided into manual cutting and automatic cutting. The large-volume cutting room is more convenient for the cutters, and it is one of the sample preparation equipments required for metallurgical experiments in colleges and universities and factories.
