Introduction: The PTL-MMB02 mm thermostat controlled pull film applicator is specifically designed to lift the film in the liquid phase. In a constant temperature environment, the film was grown by vertically pulling a sample in the liquid phase. Features: 1, using PLC program control, the control interface is simple and clear. 2. The coating is lifted at a constant temperature to facilitate film formation and curing. 3, simple operation, safe and reliable. 4, has passed CE certification. Technical Parameters: Pulling speed: 1mm/min-200mm/min Speed stability: ±0.05% Temperature: RT-100°C Sample size: 75mm × 25mm × 2.5mm Instrument size: 450mm × 500mm × 970mm Installation conditions This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1, water: no 2, electricity: AC220V 50Hz, must have a good ground 3, gas: no 4、Workbench: size 800mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: no Standard accessories Film clips: 1 set Cups: 1 Tirlas: 3
Introduction: The PTL-MMB02 mm thermostat controlled pull film applicator is specifically designed to lift the film in the liquid phase. In a constant temperature environment, the film was grown by vertically pulling a sample in the liquid phase.
