Introduction: The PTL-MMB01 thermostatic pull coating machine is designed specifically for studying liquid-phase epitaxial films. In a constant temperature environment, the film is grown by vertically pulling the sample in the liquid phase. PTL-MMB01 thermostatic pull coating machine provides a stable, constant temperature lift coating environment. PTL-MMB01 thermostatic pull coating machine has passed CE certification. Technical Parameters: 1, pull speed: 1mm/min-200mm/min 2, speed stability: ± 0.05% 3, temperature: RT-100 °C 4, sample size: 75mm × 25mm × 2.5mm 5. Size: 450mm × 500mm × 970mm Installation conditions This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1, water: no 2, electricity: AC220V 50Hz, must have a good ground 3, gas: no 4、Workbench: size 800mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: no Standard accessories: 1. Sample fixture: 1 set 2. Loading cup: 1 3. Tirlas: 3
Introduction: The PTL-MMB01 thermostatic pull coating machine is designed specifically for studying liquid-phase epitaxial films. In a constant temperature environment, the film is grown by vertically pulling the sample in the liquid phase. PTL-MMB01 thermostatic pull coating machine provides a stable, constant temperature lift coating environment. PTL-MMB01 thermostatic pull coating machine has passed CE certification.
