Sales PTL-HT high temperature pulling coating machine，Manufacturer

Position: Home > > Optical instruments and equipment > Electron microscope sample preparation > film coating machine > PTL-HT high temperature pulling coating machine for Coating Research

PTL-HT high temperature pulling coating machine for Coating Research

Product ID：GDXZdmji005

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberPTL-HT

Brand NameSYKJ

Payment TermsT/T, paypal

Brief introduction
PTL-HT (Updated from PDC-01) is a CE Certified Programmable Dip Coater with 2" Tube Furnace and color touch screen controller. It is designed for R&D Lab to prepare various optical or epitaxial films from liquid solution under a controlled temperature and atmosphere environment. Dipping rate, pulling rate, dwell time and life cycle can be setup by touch screen. Solution is located at the bottom of the sealed tube at room temperature, and sample can go through a hot zone up to 800^oC (to protect the stainless steel wire and sample clamp) under various gas atmosphere or vacuum for achieving high quality epitaxial films.
Technical parameter

Dip Coater	Working Voltage: 110V AC Max. Power Consumption: 50W 6"(L) x 4"(W) Touch Screen Display Three stages pulling speed control Total stoke length: 620mm Pulling Speed: 1-200 mm/min programmable with accuracy of +/- 0.05% Dwelling time at constant temperature zone: 1-999 seconds
Tube Furnace	Working Voltage: 110V AC Max. Power Consumption: 2KW Tube size: 2" (OD) x 24"(L) Heating Zone Length: 12" (300mm) Constant Temperature Zone: 3.1" (80mm) Max. heating temperature: 1200 ℃ Continuous working temperature: 1000 ℃ Max. heating rate: 20°C/min Note: Max. working temperature for dip coating is limited by pulling wire Included stainless steel wire: Max. working temperature < 800℃ Ni-Cr-Al wire ( not included ): Max. working temperature < 1100oC Platinium wire ( not included ) Max.working temperature 1200 ℃ ,1600 ℃
Pulling wire	Three sets of Ni-SS pulling wire are inlcluded (pic below). Max. working temperature is 800C. 800C pulling wire (Ni-SS) Optional pulling wire for higher working temperature: Ni-Cr-Al wire max. working temperature: 1100C Platinium wire max.working temperature: 1200 - 1600C
Stage Length	Lower Stage (Pre-heat zone): 236mm Center Stage (Constant temperature zone): 150mm Upper Stage (Cooling zone): 234mm
Product Dimensions	560mm(L) x 470mm(W) x 1435mm(H)
Compliance	CE Certified MET TUV or UL cerfication is available upon request at extra cost
Warranty	One Year limited warranty with lifetime support Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty
Net Weight	105 kg (230 lbs)
Shipping Weight	137 kg (300 lbs)
Shipping Dimensions	48"(L) x 45"(W) x 70"(H)

Brief introduction
PTL-HT (Updated from PDC-01) is a CE Certified Programmable Dip Coater with 2" Tube Furnace and color touch screen controller. It is designed for R&D Lab to prepare various optical or epitaxial films from liquid solution under a controlled temperature and atmosphere environment. Dipping rate, pulling rate, dwell time and life cycle can be setup by touch screen. Solution is located at the bottom of the sealed tube at room temperature, and sample can go through a hot zone up to 800^oC (to protect the stainless steel wire and sample clamp) under various gas atmosphere or vacuum for achieving high quality epitaxial films.