Introduction:
Plasma pretreatment and cleaning create ideal surface conditions for subsequent coating operations of plastics, aluminum, and even glass. Since plasma cleaning is a dry cleaning process, the material can be immediately processed into the next step in the process. Therefore, plasma cleaning is a stable and efficient process.
Due to the high energy of the plasma, chemical substances or organic contaminants on the surface of the material can be decomposed, and most of the microorganisms and polymers are effectively removed, so that the surface of the material reaches the optimum conditions required for the subsequent coating process. The use of plasma technology in accordance with the requirements of the process surface cleaning, no mechanical damage to the surface, no chemical solvents, complete green environmental protection technology, mold release agents, additives, plasticizers or other surface contamination by hydrocarbons can be removed .
The plasma cleaning process can be integrated online without additional space. Low operating costs, environmentally friendly pretreatment process. Plasma surface treatment technology can be used for the surface activation of a variety of materials, including plastics, metals, glass, textiles and so on. Whether it is to perform coating or bonding on the treated surface, effective activation of the surface of the material is a necessary process step. Technical Parameters:
Cavity material: Quartz
Power supply: AC220V
Working current: The whole working current is less than 1.2A (without vacuum pump)
RF power supply: 0-200W adjustable
RF frequency: 13.56MHz or 20.0MHz (offset less than 0.2KHz)
Frequency offset: less than 0.2KHz
Characteristic impedance: 50 ohms, automatic matching
Vacuum degree: 1pa-30Pa
Number of gas channels: Dual gas input
Gas flow: 10—100ml/min (adjustable)
Process Control: PLC Man-Machine Interface Automatic and Manual Mode
Cleaning time: 1-99999 seconds adjustable
Power size 10%-100% adjustable
Inner cavity diameter 150mm×270mm PT-5SM capacity 5L
Dimensions: PT-5SM type _600mmx500x480mm
Weight: 45Kg
Vacuum pump: pumping speed 4L/S
Vacuum chamber temperature: less than 30°C
Cooling method: forced air cooling
Introduction:
Plasma pretreatment and cleaning create ideal surface conditions for subsequent coating operations of plastics, aluminum, and even glass. Since plasma cleaning is a dry cleaning process, the material can be immediately processed into the next step in the process. Therefore, plasma cleaning is a stable and efficient process.
Due to the high energy of the plasma, chemical substances or organic contaminants on the surface of the material can be decomposed, and most of the microorganisms and polymers are effectively removed, so that the surface of the material reaches the optimum conditions required for the subsequent coating process. The use of plasma technology in accordance with the requirements of the process surface cleaning, no mechanical damage to the surface, no chemical solvents, complete green environmental protection technology, mold release agents, additives, plasticizers or other surface contamination by hydrocarbons can be removed .
The plasma cleaning process can be integrated online without additional space. Low operating costs, environmentally friendly pretreatment process. Plasma surface treatment technology can be used for the surface activation of a variety of materials, including plastics, metals, glass, textiles and so on. Whether it is to perform coating or bonding on the treated surface, effective activation of the surface of the material is a necessary process step.
