Introduction: It is suitable for the dry air of large-scale electric power equipment, such as transformers and reactors for power system, which can replace the traditional hot oil circulation drying mode of the transformer. It is also suitable for air drying and circulation drying in the warehouse, packaging and electronics. Especially for the generator hydrogen cooling system for hydrogen drying, and the SF6 gas SF6 gas dry AD dry air generator for electrical equipment maintenance, may not be affected by changes in external climatic conditions. Especially overnight operations, just sealed around the flange, filled with dry air 0.02-0.03Mpa, no oil transformer transformer reactor will not be damp. Reducing the daily pumping, filling the workload, to shorten the maintenance period, improve the quality of maintenance results. In the process of oil filtration, oil and oil equipment can be inflated and packed, in rainy days and humid environment, the oil filter, to ensure that the oil insulation to improve and reduce the water in the idle room for indoor air conditioning use. Features: The gas drying device is a low dew point, mobile type and air-cooled high purity gas generating device composed of four parts: air supply system, freeze drying system, adsorption drying system and Schneider Electric control system. Air source system consists of: air dust filter, all oil-free air compressor, air cooler (air-cooled), gas-water separator, filter composition, the output clean oil-free gas. Freeze-drying system components: The device is mainly imported full-closed high-temperature compression refrigeration unit, stable and reliable performance, you can get more cooling capacity. The system is equipped with imported fully enclosed compressor unit, air heat exchanger, evaporator, gas-water separator, fine filter; refrigeration process R22 refrigerant first by the closed high-temperature compression refrigeration compressor, cooler, desiccant, electromagnetic Valve, expansion valve, and finally through the evaporator back to the refrigeration compressor, in the evaporator internal 0-5 ℃ low temperature environment. Electrical control: the main control of the electrical part of the use of Schneider Electric, the whole electrical performance is stable, safe and reliable.
Introduction: It is suitable for the dry air of large-scale electric power equipment, such as transformers and reactors for power system, which can replace the traditional hot oil circulation drying mode of the transformer. It is also suitable for air drying and circulation drying in the warehouse, packaging and electronics. Especially for the generator hydrogen cooling system for hydrogen drying, and the SF6 gas SF6 gas dry AD dry air generator for electrical equipment maintenance, may not be affected by changes in external climatic conditions. Especially overnight operations, just sealed around the flange, filled with dry air 0.02-0.03Mpa, no oil transformer transformer reactor will not be damp. Reducing the daily pumping, filling the workload, to shorten the maintenance period, improve the quality of maintenance results. In the process of oil filtration, oil and oil equipment can be inflated and packed, in rainy days and humid environment, the oil filter, to ensure that the oil insulation to improve and reduce the water in the idle room for indoor air conditioning use.
