Introduction: The device is mainly used for power system, warehouse, packaging, electronics and other industries for air drying and drying, replacing the traditional transformer hot oil circulation drying method. Applicable to transformers, reactors and other large power equipment maintenance dry air supply, the provision of dry air to ensure that the internal insulation of electrical equipment will not be damp, maintenance personnel in the internal work of the device will not be hypoxia. Than the use of nitrogen safe, reliable, economical and convenient, in the use of dry air generator equipment maintenance, can not be affected by changes in external climatic conditions, especially overnight operations, just seal the flange, filling dry air 0.1- 0.3MPa, without the need for oil, transformers, reactors, etc. will not be damp, reducing the daily pumping, filling the workload, to shorten the maintenance period, improve the quality of maintenance results. In the process of oil filtration, oil tank equipment and oil can be inflated to improve oil efficiency (more than doubled). In the rain on the oil filter, to ensure that the oil insulation to improve and reduce the water, in the idle when the work can be used for indoor air conditioning. Features: 1. With A \ B adsorption tower, automatic alternately dehumidification regeneration, high efficiency, durable. 2. The use of screw air compressor, low temperature condensate to water and other technologies. 3. Small size, light weight, simple operation, save energy, the use of safe and reliable. 4. Comprehensive use of cold and dry machines, dryers, ultra-fine filter and other advantages of their scientific combination, resulting in high-quality low dew point of dry air. 5. The integrated design of the machine can be equipped with PLC automatic control, automatic detection of the operating parameters, compact and reasonable structure, good drying effect, low regeneration gas consumption, long working life, good effect of composite desiccant, Adsorbent extended more than three times. 6. Regenerative adsorption dehydration technology, high-precision coalescence dewatering filter, 0.01μm precision filter to ensure air cleanliness, easy operation, energy conservation, safe and reliable. Technical Parameters: Air supply: 300 M³ / h Gas pressure: 0.1 ~ 0.4 Mpa Power supply: three-phase four-wire (50HZ-380V) Total power: 36 KW Operating noise: ≤75 dB Inlet and outlet diameter: 50/50 mm Dimensions: length × width × height 2670 × 2100 × 2540mm Weight: 1900 KG Dew point: -50 ~ -70 ℃ Impurities: 0.01 μm Oil content: 0.01 ppm
Introduction: The device is mainly used for power system, warehouse, packaging, electronics and other industries for air drying and drying, replacing the traditional transformer hot oil circulation drying method. Applicable to transformers, reactors and other large power equipment maintenance dry air supply, the provision of dry air to ensure that the internal insulation of electrical equipment will not be damp, maintenance personnel in the internal work of the device will not be hypoxia. Than the use of nitrogen safe, reliable, economical and convenient, in the use of dry air generator equipment maintenance, can not be affected by changes in external climatic conditions, especially overnight operations, just seal the flange, filling dry air 0.1- 0.3MPa, without the need for oil, transformers, reactors, etc. will not be damp, reducing the daily pumping, filling the workload, to shorten the maintenance period, improve the quality of maintenance results. In the process of oil filtration, oil tank equipment and oil can be inflated to improve oil efficiency (more than doubled). In the rain on the oil filter, to ensure that the oil insulation to improve and reduce the water, in the idle when the work can be used for indoor air conditioning.
