LDO fluorescence dissolved oxygen meter Introduction: This fluorescence dissolved oxygen meter is suitable for measuring the concentration or saturation of dissolved oxygen in water. Mainly used in water and sewage treatment: aeration tanks, aerobic anaerobic tanks, nitrification and denitrification tanks, etc. Water environment monitoring of rivers, lakes, seawater, fishing grounds, etc. Features: 1. Innovative fluorescence principle, no need to replace the diaphragm and electrolyte, basically maintenance free; 2. No need to replace the fluorescent cap, lower usage cost; 3. The interference of chemical substances in wastewater can be used in relatively poor environments.; 4. React quickly with minimal agitation; 5. Measurement accuracy can reach 99% accuracy; 6. Long lifespan, with an expected lifespan of up to 5 years during normal use; 7. Large capacity storage space, can read data through USB interface without the need for driver programs. Technical parameter Measurement range: 0-20mg/L Temperature: 0-50 ℃ Resolution: 0.01mg/L, 0.01% saturation, temperature: 0.1 ℃ Accuracy: DO (dissolved oxygen): ± 1% FS Temperature: ± 0.3 ℃ Response time:<30S Digital interface: USB port Data storage: capable of storing 800000 records Working temperature: Controller: -10~55 ℃ Sensor: 0-50 ℃ Relative humidity: 0-95% Work pressure: maximum 7.5Bar
Introduction: This fluorescence dissolved oxygen meter is suitable for measuring the concentration or saturation of dissolved oxygen in water. Mainly used in water and sewage treatment: aeration tanks, aerobic anaerobic tanks, nitrification and denitrification tanks, etc. Water environment monitoring of rivers, lakes, seawater, fishing grounds, etc.
