HWP01-10S self-heating substance tester Introduction
The HWP01-10S self-heating substance tester is used to determine whether a substance will oxidize and self-heat when exposed to air at a certain heating temperature. It conforms to the 33.1.6 Test of the United Nations "Recommendations on the Transport of Dangerous Goods · Test and Standard Manual" 4 test methods for self-heating substances.
The instrument is a bench-top cabinet structure. It consists of a display control part and a heating system. It is equipped with a 25 mm side and 100 mm cubic steel wire mesh container for placing test samples. The interior of the heating system is designed with a removable compartment and a hot air circulation system. An explosion-proof glass observation window is installed on the front of the box to facilitate the observation of the sample status. The instrument can continuously detect the internal temperature of the sample within 24 hours, generate data reports, and automatically judge the test results according to the corresponding standards. Features
1) Embedded processor, Windows CE operating system;
2) 8-inch LCD touch screen, which can display test status in real time;
3) Built-in hot air circulation heating system to ensure temperature uniformity and stability;
4) The digital PID algorithm controls the heating temperature precisely, and the temperature control accuracy is high;
5) The test report contains the judgment of the type of packaging;
6) Automatic fault detection and audible and visual alarm functions to ensure safer testing;
7) Diversified test options, users can configure corresponding test parameters according to the characteristics of the sample to achieve arbitrary adjustment of the test sequence;
8) The cage can be customized according to special specifications;
9) Real-time display of running time and real-time temperature, automatic drawing of test curves, and viewing of raw data;
10) Explosion-proof glass observation window on the front of the device, pressure relief door design on the back, internal thrust is greater than 2.5 kgf.
11) The test process is fully automated without manual intervention, and supports parameter setting, data storage, and viewing reports. Technical Parameters
1) Working environment: 5 ℃ ～ 30 ℃, <85% RH
2) Temperature control range: room temperature to 200 ° C
3) Temperature control accuracy: ± 1 ℃
4) Temperature uniformity in the test area: ± 1.5 ℃ below 140 ℃
5) Temperature measurement range: 0 ～ 500 ℃
6) Resolution of temperature measurement: 0.01 ℃
7) Temperature measurement accuracy: ± 2.5 ℃ below 300 ℃
8) Standard timing range: 0 ～ 24h
9) Custom timing range: 0 ～ 48h
10) Time display resolution: 0.1s
11) Cubic steel wire mesh container:
Small container: side length 25mm, hole diameter 0.05mm;
Small container cover: 30mm × 30mm × 30mm;
Large container: side length 100mm, aperture 0.05mm;
Large container cover: 105mm × 105mm × 105mm;
Net cage size: 150mm × 150mm × 250mm;
12) Liner size: 350mm × 350mm × 400mm
Introduction
The HWP01-10S self-heating substance tester is used to determine whether a substance will oxidize and self-heat when exposed to air at a certain heating temperature. It conforms to the 33.1.6 Test of the United Nations "Recommendations on the Transport of Dangerous Goods · Test and Standard Manual" 4 test methods for self-heating substances.
The instrument is a bench-top cabinet structure. It consists of a display control part and a heating system. It is equipped with a 25 mm side and 100 mm cubic steel wire mesh container for placing test samples. The interior of the heating system is designed with a removable compartment and a hot air circulation system. An explosion-proof glass observation window is installed on the front of the box to facilitate the observation of the sample status. The instrument can continuously detect the internal temperature of the sample within 24 hours, generate data reports, and automatically judge the test results according to the corresponding standards.
