HW2000D high speed ignition furnace infrared carbon sulfur analyzer Brief introduction:
Applicable to steel, iron, alloy and other materials in the determination of carbon mass fraction two element sulfur. This instrument adopts the arc light heating combustion samples, infrared absorption test samples of carbon mass fraction two element sulfur. Features:
1. WINDOWS XP color in Chinese operating system.
2. The software functions: independent set of software; Powerful data processing and statistical functions, for days, weeks, months, the operator, the type of material, the furnace, such as data statistics and processing, Simplifies the hardware design, improve the reliability and anti-interference ability of the engine, low failure rate; Complete functions, high degree of automation.
3. The software function is strong, with one over one thousand or one over ten thousand electronic balance need to choose one in the system function, can be connected.
4. The software function is strong, the operation is simple, the realization of furnace cylinder rise automatically after "analysis" automatic "point arc ignition" (no other keys, operation can be automatically online analysis).
5. The software function is all ready, channel selection, data statistics, comparison with the results of correction, release curve shows, system monitoring, diagnosis and other functions.
6. Carbon, sulfur gas chamber design for removable structure, so that it is easy clean air chamber contaminated.
7. Instrument appearance design for landing table structure, the user does not need additional configuration table.
8. The instrument of pneumatic system adopts imported high quality solenoid valve, low failure rate.
9. Dynamic display the real-time data and release curve.
Two 10. Analysis of carbon and sulfur elements have eight channels, each with a total of 16 channels can be arbitrary collocation, wide range of choice.
11. The non-contact high frequency high voltage spark continuous automatic tracing arc, spark rate is high.
12.Before Samples of burning an oxygen, oxygen control after the big oxygen, improve the efficiency of ignition, is conducive to improving the furnace temperature and oxygen generation and release of carbon and sulfur dioxide. Technical parameters:
Measuring range: 0.0050% ~ 10.000% carbon (C) omega (to 99.999%)
Omega sulfur (S) 0.0005% ~ 0.3500% (to 99.999%)
Measurement error: carbon accord with standard of GB/T223.69-97
Sulfur in accordance with GB/T223.68-97 standard
Analysis time: 25 ~ 60 s adjustable, generally at about 35 s
Ignition furnace
Arc method: high frequency high voltage spark non-contact automatic tracing arc
The arc current: 3 ~ 15 a
Arc spacing: 2 ~ 4 mm
Electronic balance
Weighing the range: 0 ~ 100 g
The accuracy of reading: 0.001 g
Working environment: indoor temperature: 10 ℃ ~ 30 ℃
Relative humidity: less than 75%
Brief introduction:
Applicable to steel, iron, alloy and other materials in the determination of carbon mass fraction two element sulfur. This instrument adopts the arc light heating combustion samples, infrared absorption test samples of carbon mass fraction two element sulfur.
