FX4000 Micro Spectrometer Introduction: FX4000 is a general-purpose miniature fiber optic spectrometer with high cost performance, suitable for most spectral applications, and can be used to measure absorbance, transmittance, and irradiance. Typical application areas: EX double blazed grating solves the problem of high-order interference and efficiency balance in a wide spectral range, and has a more uniform response in a wide spectral range; Ultra-high optical resolution can provide optical resolution up to 0.17nm; High-speed control technology A new integration time can be set within 1ms, saving time for spectrometer control; At the same time, it supports the telephoto optical design, full spectrum technology and mark position technology of FX2000 miniature optical fiber spectrometer, which is convenient for users to build personalized spectrum measurement equipment. Technical parameter: Detection range: 200~1100nm, depending on the grating Wavelength resolution: up to 0.06nm, based on 1800-line grating, please refer to "Model Table" for details Optical Resolution: Up to 0.23nm (FWHM), based on 1800-line grating and 10μm slit, see Model Table for details Detector: Toshiba, 3648 pixels CCD Elimination of higher order diffraction: 3 pre, 4 post filter options to eliminate ghost lines in the spectrum Optical table: 72.5mm focal length, f-number 6, symmetrical non-crossing C-T beam path Integration time: 4ms ~ 60s Dynamic Range: Better than 1800:1, significantly better than similar products Signal-to-noise ratio: better than 300:1 at saturation Stray light: < 0.1%, measurement wavelength 600nm Corrected Linearity: > 99% Optical interface: SMA905 Data transmission: mini-USB, support USB2.0 communication protocol, 480Mbps transmission speed Expansion function port: 30 pin expansion function port, support sharing BreakOut-Board external function expansion board External trigger: 4 external trigger modes: Normal / Level / Edge / Synchronization Trigger delay: 11.458 ± 0.208 μs, mainly used for LIBS excitation Dimensions: 128 x 90 x 27 mm³ Weight: 0.41 kg
Introduction: FX4000 is a general-purpose miniature fiber optic spectrometer with high cost performance, suitable for most spectral applications, and can be used to measure absorbance, transmittance, and irradiance. Typical application areas: EX double blazed grating solves the problem of high-order interference and efficiency balance in a wide spectral range, and has a more uniform response in a wide spectral range; Ultra-high optical resolution can provide optical resolution up to 0.17nm; High-speed control technology A new integration time can be set within 1ms, saving time for spectrometer control; At the same time, it supports the telephoto optical design, full spectrum technology and mark position technology of FX2000 miniature optical fiber spectrometer, which is convenient for users to build personalized spectrum measurement equipment.
