Model project |
DY300 | DYK-300 |
Measure system resolution | 0.01μm | 0.01μm |
Error value | ±6% | ±6% |
Instrument radial error | (0.03+0.0004H)μm | (0.15+0.0001H)μm |
Instrument axial error | 0.06μm | ±0.125μm |
Straightness of the sensor moving along the Z-axis guideway | 0.30μm/100mm | 1μm/100mm |
Parallelism between datum axis and Z axis guide | 0. 45μm/100mm | |
Straightness of X-axis guideway moving | 0. 5μm/100mm | 1μm/100mm |
Measuring maximum external diameter | Φ300mm | Φ300mm |
Measuring minimum inner diameter | Φ 2.5mm (minimum measurable Φ 1.5mm need to be fitted with small measuring Needle) | Φ110mm |
Measure maximum height | 500mm | 1200mm |
Maximum bearing weight | 70Kg | 250Kg |
Measuring table diameter | Φ300mm | Φ300mm |
Sensor horizontal displacement | 220mm | 300mm |
Main shaft speed | ≤5r/min; | ≤5r/min; |
Power supply | Three-phase power supply 220V, 50V, 250W | |
Air pressure | ≥0.45MPa | |
Environmental requirements | Working temperature: normal temperature and humidity: 20-80%RH (no dew); good ground line, no obvious source |