CTS-PA22T1 Phased Array Full Focus Real-time 3D Ultrasound Imaging System
Introduction: CTS-PA22T1 is a new type of 64-channel fully parallel phased array full focus (TFM) fast ultrasonic imaging detection system independently developed by our company. The system collects the full matrix (FMC) data inside the material in real time, and uses the high-speed hardware imaging technology based on the signal processing chip to achieve high-precision real-time phased array 2D/3D full-focus (TFM) imaging detection of metal and non-metal materials. Create an industrial phased array RF radio frequency metadata platform, which can directly perform computer processing on the complete original data. Features: 1. Total focus (TFM) reconstruction algorithm model: According to the total focus (TFM) reconstruction algorithm model, the high-speed hardware imaging technology based on the signal processing chip is used to calculate the total focus (TFM) image results in real time, and the image update rate can reach 50fps. 2. 64 fully parallel phased array hardware channels 3. Real-time full focus (TFM) imaging detection 4. Fast C-scan imaging 5.3D Transverse Wave Total Focus (TFM) Module 6. Multiple 3D-TFM modes 7. Real-time 4D detection 8. Total focus (TFM) detection of special-shaped workpieces 9. Raw data storage and report generation Technical parameter: 1. Pulse generator Transmission waveform: Bipolar square wave Transmit pulse width: 20 ～ 600ns, step 10.0ns Transmit pulse voltage Vpp 45V ～ 100V, step 10.0V 2. Receiver Bandwidth: 0.5 ~ 15MHz Analog gain: 0 ~ 55dB, step 1.0dB, 10.0dB Digital gain: -100 ～ 100dB, step 1.0dB, 10.0dB Filter: low, medium and high 3 levels 3. Data processing Sampling frequency/digit: 62.5MHz/10 bit Input impedance: 50Ω Receiving delay: 0~40 μs, precision 2.5ns Focusing laws: Support up to 262144 focusing laws Embedded processor: large chip embedded, real-time hardware processing of big data 4. System Channel configuration: full parallel 64:64 Power consumption: 50W Operating platform: Windows7 or above Data transmission: 100M/1000M Ethernet Size: 395×283×66 Weight: 3.1Kg
Introduction: CTS-PA22T1 is a new type of 64-channel fully parallel phased array full focus (TFM) fast ultrasonic imaging detection system independently developed by our company. The system collects the full matrix (FMC) data inside the material in real time, and uses the high-speed hardware imaging technology based on the signal processing chip to achieve high-precision real-time phased array 2D/3D full-focus (TFM) imaging detection of metal and non-metal materials. Create an industrial phased array RF radio frequency metadata platform, which can directly perform computer processing on the complete original data.
