Introduction: The CTS-9003plus Ultrasonic Flaw Detector is a fully digital single channel ultrasonic flaw detector. The instrument is small in size, large in screen, light in weight, compact in structure, and advanced in circuit and process design. The instrument has practical functions, simple operation, stable and reliable performance and strong anti-interference ability. Features: 1. With 160MHz sampling frequency and wide frequency, low noise amplifier, the waveform is delicate and real. 2. Adopt 640×480 dot matrix TFT color liquid crystal display, the display is clear and the color is adjustable. 3. Full Chinese menu display with Chinese input function. 4. The software uses a real-time kernel operating system with powerful auxiliary functions. 5. The keyboard design is reasonable, simple and clear, easy to operate and easy to master. 6. The instrument circuit design and process design are advanced, the performance is reliable, and the work is stable. 7. The instrument is small in size, light in weight, easy to carry, and adaptable on site. 8. File editing function: It can store, recall, play back, print detection conditions and defect waveforms to form a test report. 9. Communication function: It can communicate with computer to realize the transmission of waveforms, conditions and data, and it is convenient to archive and manage the flaw detection data on the computer to improve safety. 10. With software upgrade function, the application software can be specially designed for users to meet the special requirements of users. Technical Parameters: Detection range: 0.0 ~ 10000mm (steel longitudinal wave). Continuously adjustable, minimum step value 0.1mm Sound speed: 1000～15000m/s, continuously adjustable. Built-in 30 common material sound velocity values Pulse shift: -20 ~ 3000μs Probe zero value: 0 ~ 999.9μs Display: High-definition TFT color LCD display, 6.5" large screen High brightness and adjustable brightness Screen refresh rate: 60Hz Pulse expression: color, optional: hollow, solid Probe interface: Two Lemo 00# probe sockets on the top of the instrument Computer, print interface: high speed USB interface RS232 serial interface 25-pin parallel printing interface Working method: Manual movement of the probe without any mechanical means Display: At the bottom of the waveform display area, 450 × 320 dot matrix. Synchronous display of waveforms Different colors indicate different amplitudes of the waveform. Result processing: can be stored, called, browseable and printable Can be transferred to a computer for further analysis Vertical linearity error: ≤3% Horizontal linearity error: ≤0.1% Sensitivity margin: >60dB (200Φ2 flat bottom hole) Resolution: >36dB (using 5P14 probe) Dynamic range: ≥32dB Electrical noise level: <15% Power supply: 1. Large capacity lithium battery, no memory effect, continuous work for more than 6 hours 2.220V AC (with power adapter) Charger: Can be charged while connected to the instrument Ambient temperature: -30 ° C ~ 50 ° C Size: 250mm × 186mm × 59mm Weight: 2.0kg (with battery)
Introduction: The CTS-9003plus Ultrasonic Flaw Detector is a fully digital single channel ultrasonic flaw detector. The instrument is small in size, large in screen, light in weight, compact in structure, and advanced in circuit and process design. The instrument has practical functions, simple operation, stable and reliable performance and strong anti-interference ability.
