Introduction: CTS-23A ultrasonic flaw detector is a portable A-type pulse reflection ultrasonic flaw detector, which can work with AC power or battery power. The instrument is suitable for non-destructive testing of metal and some non-metallic materials such as welds, forgings, etc. It is especially suitable for near-field high-resolution flaw detection, and can be used as a standardized instrument for the qualification assessment of non-destructive testing personnel. Features: 1.Variable-band wideband amplifier. 2.For wide-scan time base circuits. 3.Set high precision attenuator for fine adjustment and fine adjustment. 4.High brightness, inner scale rectangular oscilloscope. 5.Wide operating frequency, high flaw detection sensitivity, good stability, and clear waveform. 6.Small size, light weight, low power consumption and easy operation. 7.With alarm function, it can alarm "incoming wave" or "lost wave" in the gate respectively. Technical Parameters: Operating frequency range: 0.5 ~ 20MHz, divided into three frequency bands Attenuator: 90dB, every 2dB ± 0.1dB Vertical linear error: ≤5% Dynamic range: ≥30dB Scanning range (steel longitudinal wave): 5 ~ 5000mm Horizontal linear error: ≤1% Minimum detection distance: ≤1.2mm (with 5N6 narrow pulse probe) Far-field resolution: ≥30dB (with 2.5P20-D probe) Pulse shift range: (Steel longitudinal wave): 0 ~ 400mm (scanning range 5, 10, 50mm) 0 ~ 800mm (scanning range: 250, 1000mm) Sensitivity margin: ≥46dB (2.5P20-D straight probe found 200mm-ф2 flat bottom hole) Weight: Host 5.5Kg, with battery 7.5Kg Volume (length × width × height): 355mm × 254mm × 140mm
Introduction: CTS-23A ultrasonic flaw detector is a portable A-type pulse reflection ultrasonic flaw detector, which can work with AC power or battery power. The instrument is suitable for non-destructive testing of metal and some non-metallic materials such as welds, forgings, etc. It is especially suitable for near-field high-resolution flaw detection, and can be used as a standardized instrument for the qualification assessment of non-destructive testing personnel.