CT-300 manual cutting machine Introduction: CT-300 is a simple, easy-to-use and powerful manual cutting machine, paired with a Ø 300mm cutting blade. It can handle cutting of various workpiece shapes, sizes, and complex material samples. The upward push safety door design allows for easy and quick placement of samples into the cutting chamber. Powerful motors and ergonomic cutting arms enable efficient and smooth cutting. The simple and concise operation panel allows any operator to quickly and effectively cut workpieces with minimal training. characteristic 1. Using a high-power motor (5.5KW) to make cutting more powerful and labor-saving; 2. Cast aluminum base, integrated worktable, strong overall rigidity, making cutting smoother; 3. The oversized workbench and operating space make sample clamping faster; 4. A simple and concise operation panel that allows operators to quickly get started; 5. Increase the cooling pipes to ensure more thorough cooling; Technical parameters: Speed: Two gears: 2000&2500rpm Diameter: Ø 300mm (optional with Ø 350mm) Center hole: 32mm Diameter: 100mm Height x Length: 90x130mm Cutting length: 240mm Size (WxD): 380x330mm (with X-direction travel: 430x330mm) T-shaped groove width: 12mm Input: 3x380V/50Hz+ground wire (E) (optional voltage: 3x220V) Cutting power: 5.5KW Current, normal load: 10A Emergency stop: Press to cut off the control circuit and main power supply Security door lock: cannot be activated when the door is opened; During operation, the door is locked and cannot be opened Overload protection: flashing warning light for overload current Water tank capacity: 65L Water tank size (WxDxH): 400x600x630mm Interface: Inlet: High pressure pipe with an inner diameter of Ø 19; Water outlet: Φ 38 inner diameter steel wire pipe Cooling water circuit: 4 cooling pipes, flow rate: 100L/minute Exhaust volume: 10m ³/min Control mode: three levels: on, off, and automatic X-axis worktable: stroke: 50mm, accuracy: 0.1mm, handwheel movement Double blade installation: optional function: slice thickness can be customized Dimensions W × D × H: 907 * 1067 * 1530mm (closed) 907 * 1067 * 1974mm (open) Host weight: 285kg
Introduction: CT-300 is a simple, easy-to-use and powerful manual cutting machine, paired with a Ø 300mm cutting blade. It can handle cutting of various workpiece shapes, sizes, and complex material samples. The upward push safety door design allows for easy and quick placement of samples into the cutting chamber. Powerful motors and ergonomic cutting arms enable efficient and smooth cutting. The simple and concise operation panel allows any operator to quickly and effectively cut workpieces with minimal training.
