CS - H60D microcomputer carbon sulfur analyzer Brief introduction:
Can rapidly and accurately detect the iron and steel and other materials of the mass fraction of carbon and sulfur elements. Instrument controlled by single chip microcomputer technology to complete the program and simulation titration analysis; Adopted anti-corrosion solenoid valves as gas and liquid road, the switch, realize the whole process of automatic control. The operation is simple, easy to master, and the test results are accurate and reliable, equipment with high speed automatic ignition furnace, tube furnace, etc. Features:
1. The unique structure design, electronic circuit and the gas, liquid phase separation, high reliability;
2. Should the legal carbon gas, constant current, photoelectric coupling, simulated sulfur, without artificial adjustment;
3. Touch the keys are adopted to decrease the failure rate, convenient operation, novel structure;
4. Remote control analysis, automatic preparation. Technical parameters:
Methods: 1. The analysis of carbon, sulphur gas volumetric method: iodine quantity method
2. The measuring range: carbon: 0.05-6.00% sulfur: 0.005-0.240%
3. The sample quantity:
1.000 g sample to determine carbon: 1.000-1.50% sulfur: 0.005 to 0.060%
0.250 g sample to determine carbon: 0.250-6.00% sulfur: 0.020 to 0.240%
When 0.05% or less of carbon, sulfur 0.005% or less, but will be increased to 2.000 g sample according to quantity
4. Analysis time:
Vertical tubular furnace 55 seconds
High speed automatic ignition furnace in 65 seconds
Horizontal tube furnace in 80 seconds
5. Reading method: scale direct reading mass fraction
6. Analysis error:
Carbon accord with standard of GB/T223.69-97
Sulfur in accordance with GB/T223.68-97 standard
7. Environmental conditions: temperature 0 to 40 ℃, air pressure, 90.658 to 106.658 KPa.
8. Electricity source, voltage is AC220V plus or minus 10%, frequency 50 hz, grounding is good.
Brief introduction:
Can rapidly and accurately detect the iron and steel and other materials of the mass fraction of carbon and sulfur elements. Instrument controlled by single chip microcomputer technology to complete the program and simulation titration analysis; Adopted anti-corrosion solenoid valves as gas and liquid road, the switch, realize the whole process of automatic control. The operation is simple, easy to master, and the test results are accurate and reliable, equipment with high speed automatic ignition furnace, tube furnace, etc.