B3100 Water Oxygen Concentration Analyzer Introduction: The B3100 water oxygen concentration analyzer is widely used for monitoring dissolved oxygen in thermal power, chemical, metallurgical, pharmaceutical, biochemical, electronic, electroplating, printing and dyeing, food, and tap water. characteristic: 1. Multiple configurations. The ordinary configuration uses an 8-bit microcontroller, while this instrument adopts a 32-bit machine, ARM system, and CAN bus replacement technology, making it a highly intelligent and reliable instrument. 2. Oxygen electrodes have the advantages of high sensitivity, short response time, collision resistance and no deformation, and convenient mold replacement and maintenance. 3. LED dot matrix LCD display, displaying data, status, and operation prompts in Chinese, with adjustable background light. 4. Automatic temperature compensation 5. Store over 500 sets of data 6. Automatically record historical events such as instrument status, faults, and occurrence time, commonly known as notepad function 7. Use USB 2.0 communication port for data transmission 8. Built in high-energy lithium battery, charged through computer USB port or charger, automatically protected against overcharging Technical parameters: Measurement range: (0-100.0) µ g/L; (0~200.0)µg/L; (0-20.00) mg/L (automatic switching) Temperature: (0-60) ℃ Resolution: 0.1 ℃ Detection limit: 0.1 µ g/L Whole machine indication error: ± 1% FS, temperature: ± 0.5 ℃; ± 2% FS (temperature out of tolerance condition difference) Repeatability of whole machine indication: ± 0.5% FS; ± 1% FS (temperature out of tolerance condition difference) Stability of whole machine indication: ± 0.5% FS/4h ± 1% FS (poor temperature deviation condition) Automatic temperature compensation range: (0-60) ℃, with 25 ℃ as the reference Response time:<20-60 seconds (90% of final value, 25 ℃) 37 ℃: 99% Final value<60-120 seconds Communication interface: RS232 Clock accuracy: ± 1min Water sample flow rate: (100-400) mL/min Data storage quantity: 500 or more Data power failure storage time: 10Y Continuous working time of the whole machine: 36h (fully charged) Power supply: Built in power supply with 2 x 3.6V lithium batteries Charging power supply 220V ± 10% 50 ± 1Hz Working conditions: Extreme environmental temperature: (0-60) ℃ Normal temperature (10-40) ℃ Relative humidity:<85% Header dimensions: 210 mm x 110 mm x 46 mm length x width x height Instrument weight: 2.4kg
Introduction: The B3100 water oxygen concentration analyzer is widely used for monitoring dissolved oxygen in thermal power, chemical, metallurgical, pharmaceutical, biochemical, electronic, electroplating, printing and dyeing, food, and tap water.