AM-5900 Zero Gas Generator Introduction: A zero gas generator is an instrument that provides clean, dry zero gas. The zero gas generator includes an external oil-free air compressor, pressure flow controller, water removal system, SO2, NO, NO2, O3 and H2S removal devices, and CO and hydrocarbon removal devices. The zero gas generator is based on principles such as adsorption, filtration, and reaction to remove SO2, NO, NO2, O3, H2S, CO, NH3, hydrocarbons, and particulate matter from the air, and output dry and clean air. The internal water removal system removes moisture from the air and produces air with a dew point below -20 ° C, independent of the dew point at the inlet. It also helps to remove other gases, greatly extending the service life of chemical removers. Mainly used for zero calibration of environmental air quality monitoring systems and instruments. It can also be used as a clean gas for penetrating furnaces or as a combustion gas for analyzers equipped with FIDs. Features: 1. Adopting a three-level water removal system: automatic water removal with strong water removal ability 2. Equipped with long-term SO2, NO, NO2, O3, H2S removal agents and high-efficiency CO and hydrocarbon removal agents 3. Produce dry and clean zero gas with stable flow and pressure. The maximum flow rate can reach 20L/min, and the output pressure can be adjusted 4. Simple operation with less daily maintenance 5. The external air compressor can achieve automatic drainage under unmanned conditions Technical parameters: Pollutant content: SO2: < 0.5ppb NO: < 0.5ppb NO2:<0.5ppb O3: < 0.5ppb CO: < 0.025ppm Organic matter:<0.02ppm Flow output: 20SLPM@30psi Dew point: -20 ℃ Pump: external, oil-free, long service life Size: 178mmx430mmx535mm Weight: 20kg, external air compressor<22kg (optional) Power: 200V~240V, 50/60Hz, 400W
Introduction: A zero gas generator is an instrument that provides clean, dry zero gas. The zero gas generator includes an external oil-free air compressor, pressure flow controller, water removal system, SO2, NO, NO2, O3 and H2S removal devices, and CO and hydrocarbon removal devices. The zero gas generator is based on principles such as adsorption, filtration, and reaction to remove SO2, NO, NO2, O3, H2S, CO, NH3, hydrocarbons, and particulate matter from the air, and output dry and clean air. The internal water removal system removes moisture from the air and produces air with a dew point below -20 ° C, independent of the dew point at the inlet. It also helps to remove other gases, greatly extending the service life of chemical removers. Mainly used for zero calibration of environmental air quality monitoring systems and instruments. It can also be used as a clean gas for penetrating furnaces or as a combustion gas for analyzers equipped with FIDs.