Product introduction: Model 2901 roundness instrument adopts high-precision air static pressure shaft system, is equipped with imported high-precision sensors, which can measure the roundness, coaxiality, concentricity, perpendicularity, circular planeness error and other parameters of workpiece, and can carry out harmonic analysis, which can be widely used in automobile, motorcycle, machine tool, bearing, oil pump and nozzle and other industries. Technical indicators: 1. Spindle accuracy: Radial runout (0.025+0.0003H) (H-- mm from the probe to the work table); Axial penetration: 0.025 (m); 2. Working table diameter: 200mm; 3. The maximum diameter (outside diameter) of workpiece can be measured: 430mm; 4. Maximum height of workpiece can be measured: 700mm; 5. Maximum bearing weight of the working table: 40Kg (special order can reach 90kg); 6. Rotation speed: 5rpm; 7. Sensor: imported lever inductive sensor; 8. Linear range: + / - 200 + m; 9. Measuring force: 40mN; 10. Minimum instrument reading: 0.001 11. Roundness evaluation methods: LSC, MZC; 12. Filter: gaussian filter; 13. Cut-off frequency: 1-15upr 1-50upr 1-150upr 1-500upr, and other values can be set manually; 14. Power supply: 220V/50Hz; 15. Air source: 0.4 + 0.035 MPa; 16. Net weight of instrument: 100kg; 17. Instrument gross weight: 150kg; 18. Appearance and dimension of the instrument: 1600mm x 500mm x 720mm; 19. Outer dimensions of packaging: 1400mm x 1000mm x 1127mm;
Product introduction: Model 2901 roundness instrument adopts high-precision air static pressure shaft system, is equipped with imported high-precision sensors, which can measure the roundness, coaxiality, concentricity, perpendicularity, circular planeness error and other parameters of workpiece, and can carry out harmonic analysis, which can be widely used in automobile, motorcycle, machine tool, bearing, oil pump and nozzle and other industries.