Introduction: This machine is used to process the impact, tensile, compression, thermal properties and other tests of non-metallic materials such as plastic plexiglass standard spline can be milled dumbbell-shaped processing. And set the cooling cycle system. see picture 1. Technical Parameters: 1, plus dumbbell-shaped tool specifications 30 × 12 × 30mm 2, the whole appearance size 700 × 500 × 800mm 3, the spindle speed of 1430 rev / min 715 rev / min 4, cooling pump motor 60W 5, automatic feed motor 60W 6, spindle transmission motor 1.1KW
Introduction: This machine is used to process the impact, tensile, compression, thermal properties and other tests of non-metallic materials such as plastic plexiglass standard spline can be milled dumbbell-shaped processing. And set the cooling cycle system. see picture 1.
