Introduction: This machine is used to process standard splines such as impact, stretch, compression and thermal performance of non-metallic materials such as plastic and organic glass. Can cut, milling gap, milling curve and plane processing. At the same time set up a cooling system. This machine is equipped with special tools (CVD diamond coated carbide cutting tools) for cutting, dumbbell and plane milling of FRP products, as well as notched specimens of fiber reinforced plastics and resin castings. The machine is equipped with cooling circulating water (antirust grinding liquid), cooling the sample in the process, washed away cutting, lubricating the tool and the mold to reduce the wear of the grinding wheel and improve the finish of the workpiece. The use of dust for the WPC material to prevent the processing of dust on the environment pollution and reduce the harm to the human body. Is a focus on environmentally-friendly processing machine. Is the institutions of higher learning, quality arbitration, research institutes, manufacturers of material testing essential sample preparation machinery. Technical Parameters: 1, the maximum cutting width: 300mm 2, the maximum thickness of the cut: 15mm 3, the maximum milling plane length: 300mm 4, cut off with a cutter (grinding wheel) Specifications: 200 × 32 × 2mm 5, milling gap with the tool length: 50mm 6, processing dumbbell and plane with the tool specifications: 30 × 12 × 30mm 7, machine dimensions: 1130 × 720 × 950mm 8, each part of the spindle speed: Cutting part of the spindle speed: 1400-2800r / min Notched part of the spindle speed: 400r / min Milling dumbbell and flat part of the spindle speed: Low speed: 940r / min.470r / min High speed: 1430r / min.715r / min 9, motor power: Milling notched motor: 550W Milling plane and dumbbell motor: 0.8-1.3kw Turn off the motor: 0.8 kw Cooling pump motor: 60W Milling plane and dumbbell automatic feed motor: 60W
Introduction: This machine is used to process standard splines such as impact, stretch, compression and thermal performance of non-metallic materials such as plastic and organic glass. Can cut, milling gap, milling curve and plane processing. At the same time set up a cooling system. This machine is equipped with special tools (CVD diamond coated carbide cutting tools) for cutting, dumbbell and plane milling of FRP products, as well as notched specimens of fiber reinforced plastics and resin castings. The machine is equipped with cooling circulating water (antirust grinding liquid), cooling the sample in the process, washed away cutting, lubricating the tool and the mold to reduce the wear of the grinding wheel and improve the finish of the workpiece. The use of dust for the WPC material to prevent the processing of dust on the environment pollution and reduce the harm to the human body. Is a focus on environmentally-friendly processing machine. Is the institutions of higher learning, quality arbitration, research institutes, manufacturers of material testing essential sample preparation machinery.
