ZY-1006 rubber and plastic low temperature brittleness testing machine (compressor refrigeration) Introduction: ZY-1006 rubber and plastic low-temperature brittleness tester is the highest temperature when the sample is damaged by impact under the specified conditions, which is the brittle temperature. It can be used to compare the performance of plastic and other elastic materials under low temperature conditions. . The brittle temperature and low temperature properties of vulcanized rubbers of different rubber materials or different formulations can be determined. Therefore, it is indispensable in the quality inspection of scientific research materials and their products, and the control of production processes. The instrument is designed according to GB/T1682-2014 national standard, and the technical indicators meet the requirements of GB/T5470-2008 plastic impact embrittlement temperature test method and other national standards. Technical Parameters 1. Test temperature and time: -75 degrees (normally more than 1 hour) The cooling time is short, no water cooling is required, and it is more environmentally friendly. 2, cooling rate: 0°C ~ -30°C 1.2°C/min -30°C ~ -40°C 1°C/min -40 ° C ~ -75 ° C 0.7 ° C / min 3. Impact speed: 2m/s±0.2m/s 4. After constant temperature, the temperature fluctuation is less than ±0.5°C, and the temperature control is more accurate. 5. Distance from the center of the impactor to the lower end of the holder: 11±0.5mm 6, the largest external dimensions: 900 × 505 × 950mm (length × height × width) 7, studio effective space: 160 × 140 × 100mm (length × height × width) 8. Power: 800W The power is smaller. After reaching the temperature, the compressor also has automatic shutdown, which is more environmentally friendly and energy-saving.
Introduction: ZY-1006 rubber and plastic low-temperature brittleness tester is the highest temperature when the sample is damaged by impact under the specified conditions, which is the brittle temperature. It can be used to compare the performance of plastic and other elastic materials under low temperature conditions. . The brittle temperature and low temperature properties of vulcanized rubbers of different rubber materials or different formulations can be determined. Therefore, it is indispensable in the quality inspection of scientific research materials and their products, and the control of production processes. The instrument is designed according to GB/T1682-2014 national standard, and the technical indicators meet the requirements of GB/T5470-2008 plastic impact embrittlement temperature test method and other national standards.
