Introduction This series microcomputer control thermal deformation vicat softening tester for detecting rigid pipe and fitting the vicat softening temperature and the thermal deformation test.This machine mainly sensor, execute components with high quality, high reliability, high security advantages, sample frame can automatically lift, at the same time provides the PowerTest test software is a dedicated to test the vicat softening point temperature, thermal deformation temperature of the software.The machine is some pipes, pipe fittings manufacturer, quality testing unit department essential testing instrument, etc. Features 1. Switzerland imports of high-precision digital display micrometer as specimen deformation measuring element, also equipped with a dedicated data transmission lines connected to the microcomputer, can real-time upload measured displacement value to the microcomputer.The digital dial gauge has the characteristic such as high precision, high stability, fully ensure data accuracy.
2. Sample of connection rod and load rod with same diameter and materials made of low expansion alloy, deformation of the specimen holder can be reduced to a minimum, to improve the accuracy of the test results.
3. With functions of specimen holder automatic lifting, driven by linear motor has the characteristics of bearing capacity is strong, smooth operation.
4. At the same time to realize the thermal deformation and vicat softening point temperature of the two kinds of test.
5. Such as water cooling, natural cooling way, according to user's needs and tastes.
6. PoweTest with special software, powerful function, friendly interface, easy operation.
7. With multiple safety protection device to ensure that the test equipment and the safety of operating personnel. Technical parameters 1. The range of temperature control: at room temperature to 300 ℃ 2. The temperature precision: plus or minus 0.5 ℃ 3. Uniform heating rate: A speed: 5 plus or minus 0.5 ℃ / 6 min
B speed: 12 + / - 1.0 ℃ / 6 min
4. Use of medium: silicone oil or transformer oil (the user should bring along their own)
5. The deformation measurement range: > 10 mm
6. Deformation resolution: 0.001 mm
Number 7. Specimen holder: ZWK1302 - A is three, ZWK1302 - B for four, ZWK1302 - C for six
8. The load:
1) d card load: GA = 10 N + N 0.2 GB = 50 N N + 1
2) the thermal deformation of bending normal stress:
A, the use of fiber stress 1.80 Mpa
B, the use of fiber stress 0.45 Mpa
C, the use of fiber stress 8.00 Mpa
9. Maximum heating power: 4500 w or less
Five line 10. Power supply: ac three-phase 380 v + 10% for 50 hz
11. The cooling method: natural cooling and water cooling
12. With maximum temperature protection function setting
Introduction This series microcomputer control thermal deformation vicat softening tester for detecting rigid pipe and fitting the vicat softening temperature and the thermal deformation test.This machine mainly sensor, execute components with high quality, high reliability, high security advantages, sample frame can automatically lift, at the same time provides the PowerTest test software is a dedicated to test the vicat softening point temperature, thermal deformation temperature of the software.The machine is some pipes, pipe fittings manufacturer, quality testing unit department essential testing instrument, etc.
