ZWIN-AQMS-600 NOx analyzer Introduction: The nitrogen oxide analyzer is a gas analyzer product developed by our company for environmental air quality monitoring and dilution measurement in continuous emission monitoring systems (CEMS). It is based on the principle of chemiluminescence technology and combined with advanced micro processing technology. It is equipped with a built-in conversion furnace and ozone generation module, providing accurate and reliable nmol/mol~ μ Measurement and analysis of NO/NO2/NOx at the level of mol/mol (ppb~ppm). This product has the characteristics of high measurement accuracy, good reliability, fast response time, simple operation, and wide applicability. The analyzer supports manual and automatic calibration, and the calibration program can be set by the user. It also supports remote control and uploading. Real time measurement data and instrument status parameters can be automatically transmitted and queried, making it convenient for relevant departments to timely and accurately grasp the air quality status. Technical parameters: Range: Mim: (0-1000) nmol/mol Max: 0-20) μ Mol/mol (ppm) Concentration unit: nmol/mol (ppb), μ Mol/mol (ppm), μ G/m3, mg/m3 (optional) Zero noise: ≤ 0.2nmol/mol (ppb) (RMS) Range noise: ≤ 0.5% above 50nmol/mol (ppb) or 0.2 nmol/mol (ppb) Lower detection limit: 0.4 nmol/mol (ppb) Zero drift (24h): ≤ 0.5 nmol/mol (ppb) Zero drift (7 days): ≤ 1nmol/mol (ppb) Range drift (7 days): ≤ 1% F.S Linearity: ≤ 1% F.S Accuracy (repeatability): less than 1% of the reading Response time: ≤ 80s to 95% Sample gas flow rate: (400 ± 50) sccm Ozone stable working time: ＜ 30min to 95% Working temperature range: (5-40) ℃ Working humidity range: (0-90)% RH Power supply: (200-240) V AC
Introduction: The nitrogen oxide analyzer is a gas analyzer product developed by our company for environmental air quality monitoring and dilution measurement in continuous emission monitoring systems (CEMS). It is based on the principle of chemiluminescence technology and combined with advanced micro processing technology. It is equipped with a built-in conversion furnace and ozone generation module, providing accurate and reliable nmol/mol~ μ Measurement and analysis of NO/NO2/NOx at the level of mol/mol (ppb~ppm). This product has the characteristics of high measurement accuracy, good reliability, fast response time, simple operation, and wide applicability. The analyzer supports manual and automatic calibration, and the calibration program can be set by the user. It also supports remote control and uploading. Real time measurement data and instrument status parameters can be automatically transmitted and queried, making it convenient for relevant departments to timely and accurately grasp the air quality status.
