ZR-3260 automatic soot flue gas comprehensive tester Introduction
ZR-3260 automatic soot flue gas comprehensive tester (B type, miniaturization), used for the collection of particulate matter in fixed pollution sources, measurement of toxic and harmful gases such as SO2 and NOX, determination of dust removal and desulfurization efficiency; flue temperature and dynamic pressure , static pressure, moisture content measurement and conversion concentration, calculation of total emissions, etc.
Executive standard
HJ 57-2017 Fixed source of waste gas Determination of sulfur dioxide by potentiometric electrolysis
GB/T 16157-1996 Determination of particulate matter in fixed pollution source exhaust gas and sampling method of gaseous pollutants
HJ/T 48-1999 Soot sampler technical conditions
HJ 693-2014 Determination of nitrogen oxides from stationary sources - Determination of s
JJG 968-2002 Flue Gas Analyzer
JJG 680-2007 smoke sampler
JJG 518-1998 Pitotial Verification Procedure
Q/0212 ZRB014-2015 Automatic Smoke and Smoke Comprehensive Tester
HJ 973-2018 Fixed source of waste gas Determination of carbon monoxide Features
The instrument has an automatic correction function of CO to SO2. The correction function switch is optional, and the correction factor can be modified by inputting the interference test. After selecting the correction function, the instrument automatically corrects the measured SO2 by measuring the concentration of CO;
Flue gas test flow control meets the requirements of HJ/T 46;
It has a flue information database, which automatically stores the flue condition configuration information, supports Chinese character input, and can quickly extract historical data;
At the same time, it supports touch and button operation, 5.0 inch wide temperature and high brightness multi-angle flip color screen, high cold resistance, wide field of view, Chinese character graphic display, keyboard with dustproof and waterproof industrial precision design, suitable for harsh working conditions;
Built-in automatic drain pump to realize the automatic discharge function of soot and flue gas sampling condensate, more suitable for high humidity working conditions and convenient operation;
On-board large-capacity memory, sampling data to achieve unlimited storage, support for large-capacity storage media such as SD card, U disk, etc., to achieve unlimited storage of files;
Support mobile APP wireless control, support Bluetooth communication function and external Bluetooth high speed printer;
Equipped with high load, low noise and large flow pump, the flow rate can reach 80L/min;
Accurate electronic flowmeter control, real-time monitoring of temperature, metering, automatic adjustment of flow;
AC and DC voltage supply, support external power supply box or AC/DC desktop power adapter power supply, 220V power supply, charging, power-off memory function, sudden power-off during sampling, automatically save working data, call prompt recovery to continue sampling;
With DC24V input and DC24V output interface, it can be used with external power supply, and can also provide power for external accessories.
It has an overvoltage protection function greater than AC250V to avoid damage to the instrument due to excessive access voltage.
Strengthen the protection of filtration and dehumidification as well as static electricity, bumps, etc., and the whole machine is more durable.
Optional wireless communication and positioning to support mobile APP operation.
Reserve two interfaces for humidity measurement (resistive capacity method and dry and wet ball method). Technical parameters
Working power supply: AC 220V ± 10%, 50Hz;
Ambient temperature: (-20 ~ 45) °C;
Ambient humidity: 0% to 95%;
Applicable environment: non-explosion proof occasions;
The power ground wire should be well grounded;
When working in the field, there should be measures to prevent rain, snow, dust, and sun exposure.
Introduction
ZR-3260 automatic soot flue gas comprehensive tester (B type, miniaturization), used for the collection of particulate matter in fixed pollution sources, measurement of toxic and harmful gases such as SO2 and NOX, determination of dust removal and desulfurization efficiency; flue temperature and dynamic pressure , static pressure, moisture content measurement and conversion concentration, calculation of total emissions, etc.
Executive standard
HJ 57-2017 Fixed source of waste gas Determination of sulfur dioxide by potentiometric electrolysis
GB/T 16157-1996 Determination of particulate matter in fixed pollution source exhaust gas and sampling method of gaseous pollutants
HJ/T 48-1999 Soot sampler technical conditions
HJ 693-2014 Determination of nitrogen oxides from stationary sources - Determination of s
JJG 968-2002 Flue Gas Analyzer
JJG 680-2007 smoke sampler
JJG 518-1998 Pitotial Verification Procedure
Q/0212 ZRB014-2015 Automatic Smoke and Smoke Comprehensive Tester
HJ 973-2018 Fixed source of waste gas Determination of carbon monoxide
