ZR-1080 Microbial Barrier Grading Test Device for Breathable Materials Introduction: ZR-1080 microbial barrier grading test device for breathable materials is used to determine the penetrability of airborne bacteria to breathable materials of sterile medical device packaging. The test method is designed to test materials under the condition that bacterial spores can penetrate the test materials, so as to facilitate the classification of materials. characteristic: 1. Equipped with a special aerosol generator, the spray flow can be set, the aerosol distribution is uniform, the atomization effect is good, and the concentration is stable; 2. The transparent test chamber is convenient for observation of the experimental process; 3. The sample holding device can facilitate the installation and removal of samples; 4. The pipeline and gas circuit are designed reasonably without leakage; 5. The discharged gas is discharged through the high efficiency filter to make the discharged gas reach the standard emission level; 6. The structural design of the whole device is reasonable, reliable and convenient for installation and experiment. Technical parameters: Working temperature: (0~50) ℃ Spray particle size: (0.3~3.0) um High efficiency air filter characteristics: 0.3 μ Filtering efficiency of particles above m ≥ 99.99% Input power: AC (220 ± 22) V, (50 ± 1) Hz Host weight: about 30kg Host size: (750 × four hundred and twenty × 520) mm Power consumption:<100W
Introduction: ZR-1080 microbial barrier grading test device for breathable materials is used to determine the penetrability of airborne bacteria to breathable materials of sterile medical device packaging. The test method is designed to test materials under the condition that bacterial spores can penetrate the test materials, so as to facilitate the classification of materials.
