Introduction: MSK-FT01 Slurry Filtration Unit is a special filter specially designed for the laboratory to filter out various hard particles with a particle size of not less than 124μm in the slurry. This machine is equipped with filters that filter positive and negative particles, respectively, while the receiving tanks are made of SUS304 stainless steel. The anti-corrosion performance is good. Filters with large filter areas configured for them can make the pressure loss very low. Features: 1. Both the movable and the fixed linings are lined with a corundum lining plate. There are corundum ceramic plates on both sides of the crushing cavity, so there is no pollution to the material, and the abrasion resistance is improved, and it is easier to clean. 2, the size of the output can be adjusted by micrometer. 3, has passed CE certification. Technical Parameters: Product Model:MSK-FT01 Power supply: DC12V 0.4A Air pump flow: 3L/min Absolute vacuum: 65KPa Filtration accuracy: no less than 124μm Volume: 750ml Filter: 150mm×150mm×200mm Air generator: 140mm×70mm×150mm Weight: 4kg
Introduction: MSK-FT01 Slurry Filtration Unit is a special filter specially designed for the laboratory to filter out various hard particles with a particle size of not less than 124μm in the slurry. This machine is equipped with filters that filter positive and negative particles, respectively, while the receiving tanks are made of SUS304 stainless steel. The anti-corrosion performance is good. Filters with large filter areas configured for them can make the pressure loss very low.
