ZL-1602 Bevel Impact Tester Introduction: The bevel impact test bench simulates the product's ability to withstand impact in actual environments, such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, and transportation of products. The inclined impact table can also be used as a common test equipment for slope impact in scientific research institutions, colleges and universities, packaging technology testing centers, packaging materials manufacturing plants, and foreign trade and transportation departments. Applicable standards: GB/T 4857.11-2005, GB/T1019.2008, ISTA 1A Characteristics 1. Flexible positioning of the electric block, easy to fix the position and achieve the required speed change value; 2. The height of the pulley is relatively low, which is conducive to the installation of the test piece; 3. The trolley table can be adjusted to a level to facilitate the user to install the test piece; 4. It can be operated by remote control to fully guarantee the safety of test personnel; 5. When installing, the user only needs to fix the machine on the ground, no other operation or installation, and the test is convenient; 6. The impact plate can be fixed on the impact plate, and the height can be adjusted; 7. Using touch screen control; 8. The impact surface of the baffle has sufficient hardness, and a damper is installed on the baffle structure frame to prevent secondary impact. Technical Parameters: Load 200kg (or negotiate) Allowable specimen size: 1400x1400x2000mm Angle between impact surface and orbital plane: 90°±1° Baffle impact surface size: The impact surface of the baffle should be flat and its size should be larger than the size of the impacted part of the test sample. Deformation: When the surface is subjected to a load of 200kg/cm2, the deformation shall not exceed 0.25mm. Test piece sliding length: 2000mm (or negotiation) Impact speed range: 1.305-2.68m/s Impact plate size: 2000x2200mm Impact speed error: ≤±5% Tilt angle: 0-25° cylinder adjustment, error ±1° Control system: LCD touch screen Power supply voltage: three-phase 380V 50/60Hz Working environment: Temperature 0～45°C, humidity ≤85% (no condensation) Dimensions: 4600 × 2200 × 2600mm
Introduction: The bevel impact test bench simulates the product's ability to withstand impact in actual environments, such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, and transportation of products. The inclined impact table can also be used as a common test equipment for slope impact in scientific research institutions, colleges and universities, packaging technology testing centers, packaging materials manufacturing plants, and foreign trade and transportation departments. Applicable standards: GB/T 4857.11-2005, GB/T1019.2008, ISTA 1A
