Introduction: This equipment is a new type of equipment designed and manufactured by applying the principle of hydraulic transmission to prepare samples for testing. The upper part of the equipment is the operation area for sample preparation, and the lower part is the hydraulic system and electrical control part. The hydraulic oil with a certain pressure flows out from the oil outlet of the hydraulic system, passes through the high-pressure oil pipe, flows into the hydraulic cylinder located on the upper part of the equipment, and pushes the piston of the hydraulic cylinder to move, so that the pressure plate stamping sample mold at the end of the piston of the hydraulic cylinder (test The sample mold needs to be customized), so that the sample can be obtained conveniently, quickly and accurately. Features: 1. Operational safety: A safety light curtain is installed in front of the operation table. When placing cutting materials or taking out samples, the equipment is in a safe protection state and cannot be operated, so the operator is protected from injury. 2. It is convenient and quick to make samples, and it is formed in one time. 3. The sample size is accurate and the surface finish is high. Technical parameter: 1. Blanking force: 15T 2. Stamping stroke: 100mm (adjustable within 100mm) 3. The thickness of the punched sample: metal sample ≤ 1mm (142mm*24mm), the thickness of the sample length and width less than 142*24mm can be correspondingly larger. Non-metallic sample ≤6mm 4. Workbench size: length 680 X width 420 (mm) 5. Power: 2.2 KW 6. Fuel tank volume: 36 L (filling 25 L hydraulic oil equipment can work normally) 7. Dimensions: Length 750 X Width 500 X Height 1600 (mm) 8. Weight: 165 Kg 9. Accept large size styles and large tonnage equipment customization.
Introduction: This equipment is a new type of equipment designed and manufactured by applying the principle of hydraulic transmission to prepare samples for testing. The upper part of the equipment is the operation area for sample preparation, and the lower part is the hydraulic system and electrical control part. The hydraulic oil with a certain pressure flows out from the oil outlet of the hydraulic system, passes through the high-pressure oil pipe, flows into the hydraulic cylinder located on the upper part of the equipment, and pushes the piston of the hydraulic cylinder to move, so that the pressure plate stamping sample mold at the end of the piston of the hydraulic cylinder (test The sample mold needs to be customized), so that the sample can be obtained conveniently, quickly and accurately.
