Features: 1. The body of the product container is made of stainless steel and durable. 2. Microcomputer automatic control of the entire process. 3. LED digital display settings and dynamic temperature, timing value. 4. The water tank and the sterilization chamber adopt double pressure, dual temperature display and control. 5. LED lights and alarm devices indicate the equipment operating status in all directions. 6. PID temperature control function, can automatically correct the heating control parameters by selecting, to prevent the flushing temperature. 7. Temperature control accuracy ±0.5°C. 8. Overtemperature (set temperature + 2°C) alarm, stop heating. 9. With automatic replenishment function, the lack of water to stop heating, replenishment, continue to heat after reaching the low water level, in order. 10. Safety valve overpressure protection. 11. The sterilizer door has an electronic interlocking device to ensure that the door is not in place, the lock is not locked and the handwheel is not operated by steam. In the sterilization chamber, the door lock cannot be opened under pressure, the handwheel cannot rotate, and the door cannot be opened. 12. Self-expanding silicone rubber seal has good sealing effect and long service life. 13. With the continuous operation of the water tank, it has a drying function. 14. After the insulation is completed, the steam exhaust mode can be selected to meet the pressure relief requirements after sterilization of different types of substances. Technical Parameters: Model: YX600W(O) Applicable power supply: Three-phase five-wire system 380V/50Hz Power: 12kW Temperature setting: room temperature +5～138°C Time setting: 1～99.59min/h Internal temperature difference: ≤1°C Water pressure: ≥0.25MPa Volume: 300L Sterilization room size: 60×100 Dimensions: 120×76×170 Packing size: 155×88×190
Features: 1. The body of the product container is made of stainless steel and durable. 2. Microcomputer automatic control of the entire process. 3. LED digital display settings and dynamic temperature, timing value. 4. The water tank and the sterilization chamber adopt double pressure, dual temperature display and control. 5. LED lights and alarm devices indicate the equipment operating status in all directions. 6. PID temperature control function, can automatically correct the heating control parameters by selecting, to prevent the flushing temperature. 7. Temperature control accuracy ±0.5°C. 8. Overtemperature (set temperature + 2°C) alarm, stop heating. 9. With automatic replenishment function, the lack of water to stop heating, replenishment, continue to heat after reaching the low water level, in order. 10. Safety valve overpressure protection. 11. The sterilizer door has an electronic interlocking device to ensure that the door is not in place, the lock is not locked and the handwheel is not operated by steam. In the sterilization chamber, the door lock cannot be opened under pressure, the handwheel cannot rotate, and the door cannot be opened. 12. Self-expanding silicone rubber seal has good sealing effect and long service life. 13. With the continuous operation of the water tank, it has a drying function. 14. After the insulation is completed, the steam exhaust mode can be selected to meet the pressure relief requirements after sterilization of different types of substances.
