Summary: The negative pressure isolator is a hard cabin isolator designed according to the requirements of HES. It is mainly used for weighing, dosing, unloading packaging, sampling and other operations of API or preparation products with high toxicity and high sensitization. Through the controllable negative pressure environment, it can realize the best protection for operators when weighing and repacking compound drugs or samples. The negative pressure isolator protects not only the operator, but also the product and operation process. Product features: For sampling, weighing and packaging of highly toxic and highly active drugs; The incoming and outgoing system composed of air lock and RPT transfer device can realize the safe transfer of samples. The turbulent flow model allows for maximum pollution control at low wind speeds, which results in low energy consumption. Low negative pressure ensures maximum pollution control while reducing fatigue of operators; Low cavity pressure and low wind speed, together with the anti-vibration weighing platform, provide stable and accurate sample weighing; The cylinder dust collection air filter can be replaced inside the cabin by operating gloves to avoid the pollution damage to human body; The system integrates the automatic detection function of hull integrity. Smooth and easy to clean inner and outer surfaces, easy to clean; The lighting system is designed outside the isolator cavity, easy to maintain, and convenient to carry out thorough cleaning inside the cavity; Equipped with cleaning gun (CIP) and drainage system; PUSH-PUSH filter is optional, allowing online filter replacement. Technical parameters: Model: YT - N1200A Dimensions: 2000*800*2000 Operating cabin size: 1200*650*850 Air lock chamber size: 750*650*850 Power supply: AC220V 50Hz Power: 800 w Operation port: single side 2+1 single side 3+1 single side 4+1 Size of operating port: 240mm in diameter Flow pattern: engineering turbulence Maximum wind volume: 75m3/h High performance filter: level 99.98% H13 Pressure control: -99pa ~ 0Pa Operating port protection wind speed: 0.5m/s (reference to ISO 14644-7) Hour leakage rate: no more than 0.5% (see ISO 14644-7)
Summary: The negative pressure isolator is a hard cabin isolator designed according to the requirements of HES. It is mainly used for weighing, dosing, unloading packaging, sampling and other operations of API or preparation products with high toxicity and high sensitization. Through the controllable negative pressure environment, it can realize the best protection for operators when weighing and repacking compound drugs or samples. The negative pressure isolator protects not only the operator, but also the product and operation process.
