Features: 1, drying speed, the material by centrifugal spray, the surface area greatly increased in the high temperature air, the instant can be evaporated 95-98% moisture, dry time to complete only a few seconds. 2, suitable for heat-sensitive materials. As the droplets and hot air flow in the direction of flow, although the hot air temperature is higher, but the material will not overheat when the water evaporates. 3, the use of a wide range. A large number of materials with great differences in physical properties are used for this production. Such as polymers and resins; dyes, pigments; ceramics, glass; rust, insecticides; carbohydrates; dairy products; blood and fish products; fertilizers; organic and inorganic compounds; Wait. 4, the product has good dispersion, mobility and solubility. This is due to the completion of drying in an instant, the product can maintain a uniform fine granular. 5, the production process is simplified, easy to operate and control. For wet content of 40-60% (special materials up to 90%) solution can be dried into a powder product, dry and then do not need to be crushed and screened to reduce the production process and improve product purity. For the product size, bulk density, water, within a certain range, can change the operating conditions to adjust, control, management is very convenient. Technical Parameters: 1, the inlet temperature ≤ 180-250 ℃ 2, the outlet temperature <80 ~ 90 ℃ 3, the maximum evaporation of water 10kg / h 4, centrifugal spray head drive form: mechanical transmission 5, speed 22000rpm 6, spray disc diameter 80mm 7, heat source: electricity 8, electric heating maximum power 28kw 9, Dimensions L × W × H (mm): 2500 × 1600 × 2800 10, dry powder recovery ≥ 98%
Features: 1, drying speed, the material by centrifugal spray, the surface area greatly increased in the high temperature air, the instant can be evaporated 95-98% moisture, dry time to complete only a few seconds. 2, suitable for heat-sensitive materials. As the droplets and hot air flow in the direction of flow, although the hot air temperature is higher, but the material will not overheat when the water evaporates. 3, the use of a wide range. A large number of materials with great differences in physical properties are used for this production. Such as polymers and resins; dyes, pigments; ceramics, glass; rust, insecticides; carbohydrates; dairy products; blood and fish products; fertilizers; organic and inorganic compounds; Wait. 4, the product has good dispersion, mobility and solubility. This is due to the completion of drying in an instant, the product can maintain a uniform fine granular. 5, the production process is simplified, easy to operate and control. For wet content of 40-60% (special materials up to 90%) solution can be dried into a powder product, dry and then do not need to be crushed and screened to reduce the production process and improve product purity. For the product size, bulk density, water, within a certain range, can change the operating conditions to adjust, control, management is very convenient.