Introduction: The vacuum degasser operates efficiently in all closed water circulation systems. It can quickly and effectively remove all free gas and dissolved gases. The vacuum degasser works by placing a portion of the liquid in the system in a vacuum and the dissolved gases in the liquid are released and separated from the system. Afterwards, these degassed, absorbent liquids are injected back The system participates in the cycle, which absorbs the presence of free gas and dissolved gases in the system to achieve equilibrium again. This process is repeated and almost all of the gas in the system is released. Vacuum degasser can be connected with the building automation system to provide running status display, and remote control of the vacuum degasser start and stop. Features: 1 Reliable degassing equipment 2 suitable for any water cycle (water supply / heating) system 3 full Chinese display interface, easy to use 4 vacuum degasser working time within 7 days can be adjusted 5 can be connected with the building automation system 6 single vacuum degasser corresponding to the system volume of 150m ³ or less 7 can be wall mounted 8 to maintain the best heat transfer effect 9 greatly shorten the system after the initial test run time 10 to ensure stable operation of the system 11 The overall system is running efficiently, no noise 12 easy to install, and easy to repeatedly loading and unloading Technical indicators: System volume: 150 m³ Size: 1000 * 550 * 350 Net weight: 60kg Incoming water connection: DN20 internal thread Voltage (50-60Hz): 3 × 380v Power (w): 800/1200 Rated current: 3.5A Starting current: 2.6max Protection class: IP44
Introduction: The vacuum degasser operates efficiently in all closed water circulation systems. It can quickly and effectively remove all free gas and dissolved gases. The vacuum degasser works by placing a portion of the liquid in the system in a vacuum and the dissolved gases in the liquid are released and separated from the system. Afterwards, these degassed, absorbent liquids are injected back The system participates in the cycle, which absorbs the presence of free gas and dissolved gases in the system to achieve equilibrium again. This process is repeated and almost all of the gas in the system is released. Vacuum degasser can be connected with the building automation system to provide running status display, and remote control of the vacuum degasser start and stop.
